rx7's in charlotte nc
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2006
Location: Hawthorne, CA
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
rx7's in charlotte nc
im bored at work and i was wondering who is all located in charlotte or near charlotte. i would like to get a meet started some time here. we had a really good one here like almost a year and half ago in concord or huntersville or something like that thats where i met alot of charlotte guys but i would like to chill out with some weekend or something, so if your from charlotte or the sorounding area. leave a coment if you wanna chill some time or set up a meet.
later
marshall
later
marshall
#2
PSHH! PSHH! HEAR ME NOW?
iTrader: (3)
Man........there are alot of RX7 people in the Charlotte area, and north of Charlotte. You should check out Intense Motorsports, or RotorSports Racing. We have a few who meet up when we can, usually in the Mooresville area. Kinda central for everyone. You are welcome hang out with us if you like. If you are interested, here's a link to our thread. https://www.rx7club.com/se-rx-7-forum-35/i77-i40-crossroads-rotary-meet-618153/page11/
#4
Eats, Sleeps, Dreams Rotary
iTrader: (4)
Join Date: Apr 2003
Location: Denver, NC
Posts: 3,531
Likes: 0
Received 0 Likes
on
0 Posts
I live in Denver but work at charlotte honda motorcycles on freedom dr. I drive the 94 everyday. Affectionately known as "rudolph".....It's obvious why when you see it.
Dave
Dave
#6
Senior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2006
Location: Hawthorne, CA
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
so i have heard of intense but where is it in charlotte. i know yall have some of the meets in statesville like the cross roads or what not. but i wanna do another big meet like get a hole buch of people up here. just gotta plan i guess.
#7
Senior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2006
Location: Hawthorne, CA
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
oh yeah and some time i dont remember people buy there name but i remember by there car. i will go first
my first car that i had was an 86 gxl with a huge exhaust leak that was primer black after that it had the awful house paint. sold
then my black car 89 gtu in the pic below beautiful car slammed to the ground. well was and about to be again. still have
and now the 87 gxl turbo II swaped with haltech witch i just bought like last week
now its your turn
my first car that i had was an 86 gxl with a huge exhaust leak that was primer black after that it had the awful house paint. sold
then my black car 89 gtu in the pic below beautiful car slammed to the ground. well was and about to be again. still have
and now the 87 gxl turbo II swaped with haltech witch i just bought like last week
now its your turn
Trending Topics
#12
Senior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2006
Location: Hawthorne, CA
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
hahah thats funny thats good that your getting a 7 is your buddy zak the only reason i know his name is because my buddy zak works at project auto salon and every time i talk to some one about my friend they think its him
#14
Full Member
Join Date: Aug 2006
Location: suffern, ny
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
just let me know i am down to meet up anytime. It'll be ebst if we did it on a weekend so i don't have to go to work the next day. Here is a vid of my car when it was at 8 pounds of boost and i was racing my bros supercharged 330. I posted it up here awhile ago but you guys can see it now so when you see it in person your not shocked. It looks like **** but it runs like a champ
http://media.putfile.com/rx-46
Now its got a new motor, 99 turbos and a little more boost. Just waiting for Zak to tune it. Intense is right next UNC charlotte i believe. I really don't know i only went there once
http://media.putfile.com/rx-46
Now its got a new motor, 99 turbos and a little more boost. Just waiting for Zak to tune it. Intense is right next UNC charlotte i believe. I really don't know i only went there once
#15
Senior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2006
Location: Hawthorne, CA
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
haha can you say smoked yeah that would be cool where do you live? and im guessing i was right with name at intense i need to go up there and check it out. this wouldnt hapen to be the same zak that worked at rotor sports would it? any ways deff should get a meet some time soon. i would love to chill out with all the charlotte and surrounding area people even if its a week night i dont care. im gonna try and get some what of a location base where evry one lives neer. i live in the providence area of charlotte. but i work at nissan on indpendence so im pritty much down for any location. but it seems like theres more of a turn out off 77 or other major high ways so im open to ideas
#16
Full Member
Join Date: Aug 2006
Location: suffern, ny
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
haha can you say smoked yeah that would be cool where do you live? and im guessing i was right with name at intense i need to go up there and check it out. this wouldnt hapen to be the same zak that worked at rotor sports would it? any ways deff should get a meet some time soon. i would love to chill out with all the charlotte and surrounding area people even if its a week night i dont care. im gonna try and get some what of a location base where evry one lives neer. i live in the providence area of charlotte. but i work at nissan on indpendence so im pritty much down for any location. but it seems like theres more of a turn out off 77 or other major high ways so im open to ideas
#18
Free Candy
Join Date: May 2003
Location: Charlotte, NC
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
yeah, it's zak at intense (that used to work at rotorsports). he's a nut but can build a rotary! I'm down for a meet whenever. minus this weekend, like i said i'll be picking up the vert then
i feel like such a noob again. Had a turbo 240sx, know plenty about that, but don't know a whole lot about the tuning ins and outs of rotaries.
i feel like such a noob again. Had a turbo 240sx, know plenty about that, but don't know a whole lot about the tuning ins and outs of rotaries.
#19
Just turn up the boost!
iTrader: (1)
Join Date: Jul 2007
Location: HELL
Posts: 662
Likes: 0
Received 0 Likes
on
0 Posts
ahhhhhhhhhhhhhhhhhhhhhhh wasaaaap! charlotte PWNZ lets get some people rockin out!
haha we meet up EVERY saturday night right off independence... sardis road actually right behind the walmart. stop by the shop sometime and i'll fill you in and show you around.
Intense Motorsports
5621 N. Sharon Amity
charlotte, NC 28215
haha we meet up EVERY saturday night right off independence... sardis road actually right behind the walmart. stop by the shop sometime and i'll fill you in and show you around.
Intense Motorsports
5621 N. Sharon Amity
charlotte, NC 28215
#21
Senior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2006
Location: Hawthorne, CA
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
yes that is the same sak that worked at rotorsports. Now he does his own thing at intense. I live in greensboro at the moment but i am just getting familiar with the area. Also i have a bike so lately i've been meeting up with these people that ride into charlotte every weekend so i just go down there to see what its like.
#22
Senior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2006
Location: Hawthorne, CA
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
that dosnt give you an exsuse to come and hang with your friend hahah jk man how are you doing evry time i get on aim the slight chance i am i always look for you man. hows jacksonville
#23
Senior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2006
Location: Hawthorne, CA
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
yeah, it's zak at intense (that used to work at rotorsports). he's a nut but can build a rotary! I'm down for a meet whenever. minus this weekend, like i said i'll be picking up the vert then
i feel like such a noob again. Had a turbo 240sx, know plenty about that, but don't know a whole lot about the tuning ins and outs of rotaries.
i feel like such a noob again. Had a turbo 240sx, know plenty about that, but don't know a whole lot about the tuning ins and outs of rotaries.
#24
Senior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2006
Location: Hawthorne, CA
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
ahhhhhhhhhhhhhhhhhhhhhhh wasaaaap! charlotte PWNZ lets get some people rockin out!
haha we meet up EVERY saturday night right off independence... sardis road actually right behind the walmart. stop by the shop sometime and i'll fill you in and show you around.
Intense Motorsports
5621 N. Sharon Amity
charlotte, NC 28215
haha we meet up EVERY saturday night right off independence... sardis road actually right behind the walmart. stop by the shop sometime and i'll fill you in and show you around.
Intense Motorsports
5621 N. Sharon Amity
charlotte, NC 28215
first ? im guessing this is zak ive meet you a couple of times. on different occasions. you might remember me and i think where friends on myspace too haha but yeah ill have to stop by the shop and hang out for a little. what time do you close i dont get out of work till 6
#25
PSHH! PSHH! HEAR ME NOW?
iTrader: (3)
oh yeah and some time i dont remember people buy there name but i remember by there car. i will go first
my first car that i had was an 86 gxl with a huge exhaust leak that was primer black after that it had the awful house paint. sold
then my black car 89 gtu in the pic below beautiful car slammed to the ground. well was and about to be again. still have
and now the 87 gxl turbo II swaped with haltech witch i just bought like last week
now its your turn
my first car that i had was an 86 gxl with a huge exhaust leak that was primer black after that it had the awful house paint. sold
then my black car 89 gtu in the pic below beautiful car slammed to the ground. well was and about to be again. still have
and now the 87 gxl turbo II swaped with haltech witch i just bought like last week
now its your turn
Was that your car we had to push start when we had that meet at the at the lake Mall? Just kidding. I think I remember you. I was driving the grayish first gen GSL with the primered drivers fender. Alot has changed on that car since then. I have also got my SA back up and on the road. I would like to meet up with you guys if we could maybe do something sometime a little north of Charlotte. I'm not opposed to coming to Charlotte, I just hate the freeking traffic!