OFFICIAL SHOP List for Florida
maztech
I dont actully own a RX-7 yes ( im still looking and pricing ) but i was wondering
can anyone confirm the quality of this place?
Maztech
Tampa, FL
813-874-0937
i know a little bit about cars so im not completely brainless on it but ive never owned a rotory engine automobile. Im trying to get as much information as possiable about the car before i get it so i dont have to go look for it later when something happens.
can anyone confirm the quality of this place?
Maztech
Tampa, FL
813-874-0937
i know a little bit about cars so im not completely brainless on it but ive never owned a rotory engine automobile. Im trying to get as much information as possiable about the car before i get it so i dont have to go look for it later when something happens.
Lovin my 7
Joined: Apr 2006
Posts: 756
Likes: 0
From: Lakeland, FL
I have met Kilo and his son several times at the Lakeland Track, I would love to have Kilo do the work but I also know how busy he is and have heard of things sitting there for a while. But then again... Im not really in a hurry...
I swore I put this shop on the list.
The owner is a rare breed and its a 1 man shop so he is the only one working on your car. Any of you that were at the National Mazda Day event this past weekend may have seen the Black TII with the vented hood and the 13B-REW Swap.
This man did the swap, not only that he made all kinds of custom parts for the swap. He is always coming up with really cool ideas and putting them into our cars. He revamped my cooling system and now my car never goes over 180.
He makes some really cool go fast parts that are totally custom and 1 of a kind, like ported throttle bodies, cold air intakes for FD's, ported intake tracks. He also makes a rear diff brace for FC's, after breaking 2 of my rear diff mounts and then putting in his brace, no more broken mounts.
His shop is called
Just Racing Fabrications
he is in Port St. Lucie Florida right off the Turnpike.
His name is JR and his number is
(772) 343-0510
He is honest to a fault, and will not rip you off, if your into using old parts for rebuilds and "just getting it together until the next rebuild" do not bother with this guy unless you want to buy the crappy old parts he will not put into our cars.
Remember he is a one man shop and does all his work custom and himself. He is not fast he is not the cheapest, but if you want it done ONCE and done right he is the man to go to.
He has been messing with Rotaries since the late 70's road racing 1st gen RX7's and setting up customers cars.
He also makes custom roll cages that compliment the cars by adding rigidness to it picking up on its chassis weak points and stiffening it up.
The owner is a rare breed and its a 1 man shop so he is the only one working on your car. Any of you that were at the National Mazda Day event this past weekend may have seen the Black TII with the vented hood and the 13B-REW Swap.
This man did the swap, not only that he made all kinds of custom parts for the swap. He is always coming up with really cool ideas and putting them into our cars. He revamped my cooling system and now my car never goes over 180.
He makes some really cool go fast parts that are totally custom and 1 of a kind, like ported throttle bodies, cold air intakes for FD's, ported intake tracks. He also makes a rear diff brace for FC's, after breaking 2 of my rear diff mounts and then putting in his brace, no more broken mounts.
His shop is called
Just Racing Fabrications
he is in Port St. Lucie Florida right off the Turnpike.
His name is JR and his number is
(772) 343-0510
He is honest to a fault, and will not rip you off, if your into using old parts for rebuilds and "just getting it together until the next rebuild" do not bother with this guy unless you want to buy the crappy old parts he will not put into our cars.
Remember he is a one man shop and does all his work custom and himself. He is not fast he is not the cheapest, but if you want it done ONCE and done right he is the man to go to.
He has been messing with Rotaries since the late 70's road racing 1st gen RX7's and setting up customers cars.
He also makes custom roll cages that compliment the cars by adding rigidness to it picking up on its chassis weak points and stiffening it up.
Junior Member
Joined: Jun 2009
Posts: 18
Likes: 0
From: Florida
I swore I put this shop on the list.
The owner is a rare breed and its a 1 man shop so he is the only one working on your car. Any of you that were at the National Mazda Day event this past weekend may have seen the Black TII with the vented hood and the 13B-REW Swap.
This man did the swap, not only that he made all kinds of custom parts for the swap. He is always coming up with really cool ideas and putting them into our cars. He revamped my cooling system and now my car never goes over 180.
He makes some really cool go fast parts that are totally custom and 1 of a kind, like ported throttle bodies, cold air intakes for FD's, ported intake tracks. He also makes a rear diff brace for FC's, after breaking 2 of my rear diff mounts and then putting in his brace, no more broken mounts.
His shop is called
Just Racing Fabrications
he is in Port St. Lucie Florida right off the Turnpike.
His name is JR and his number is
(772) 343-0510
He is honest to a fault, and will not rip you off, if your into using old parts for rebuilds and "just getting it together until the next rebuild" do not bother with this guy unless you want to buy the crappy old parts he will not put into our cars.
Remember he is a one man shop and does all his work custom and himself. He is not fast he is not the cheapest, but if you want it done ONCE and done right he is the man to go to.
He has been messing with Rotaries since the late 70's road racing 1st gen RX7's and setting up customers cars.
He also makes custom roll cages that compliment the cars by adding rigidness to it picking up on its chassis weak points and stiffening it up.
The owner is a rare breed and its a 1 man shop so he is the only one working on your car. Any of you that were at the National Mazda Day event this past weekend may have seen the Black TII with the vented hood and the 13B-REW Swap.
This man did the swap, not only that he made all kinds of custom parts for the swap. He is always coming up with really cool ideas and putting them into our cars. He revamped my cooling system and now my car never goes over 180.
He makes some really cool go fast parts that are totally custom and 1 of a kind, like ported throttle bodies, cold air intakes for FD's, ported intake tracks. He also makes a rear diff brace for FC's, after breaking 2 of my rear diff mounts and then putting in his brace, no more broken mounts.
His shop is called
Just Racing Fabrications
he is in Port St. Lucie Florida right off the Turnpike.
His name is JR and his number is
(772) 343-0510
He is honest to a fault, and will not rip you off, if your into using old parts for rebuilds and "just getting it together until the next rebuild" do not bother with this guy unless you want to buy the crappy old parts he will not put into our cars.
Remember he is a one man shop and does all his work custom and himself. He is not fast he is not the cheapest, but if you want it done ONCE and done right he is the man to go to.
He has been messing with Rotaries since the late 70's road racing 1st gen RX7's and setting up customers cars.
He also makes custom roll cages that compliment the cars by adding rigidness to it picking up on its chassis weak points and stiffening it up.
Jesus is much quicker than any other shop that worked on my 20B. What he did in a couple of months, others took over a year and still didn't finish.
Yeah JR is the man, definitely go see him when you get your rx7!
I just moved down here and brining my car down from Nashville. I'm looking for a shop near Tampa, Gainesville, or Orlando that can do some maintenance work, suspension work (bushing instal), and troubleshooting. I won't be down here for long and I don't have the tools to do the work.
I just moved down here and brining my car down from Nashville. I'm looking for a shop near Tampa, Gainesville, or Orlando that can do some maintenance work, suspension work (bushing instal), and troubleshooting. I won't be down here for long and I don't have the tools to do the work.
9793 S Orange Blossom Trail
Orlando, FL 32837-8997
(407) 438-5467
Jesus Padilla does the absolute best high quality work at a great price. He saved my 4 year 3 rotor conversion project and I wouldn't think of going anywhere else.
Full Member
Joined: May 2007
Posts: 126
Likes: 0
From: lakeland, florida
I need a good and fair shop to do a Vert to T2 conversion in Central florida. I live in polk county so I would like to find someone here, if not then Orlando and Tampa isnt to far away. Anyone know any good shops around Lakeland FL
His number: 407-438-5467
Hi guys maybe someone can help me out,,,, I had a young guy in the Miami, FL area which worked on my RX7 named Curtis... He drives a white mazda miata, i know he use to work at one of the local area Mazda dealerships.. I know a couple of months ago he started working at a shop by Tamiami Airport on SW 137 AVE, SW 120 ST.
Can someone assist me find this guy out...
Can someone assist me find this guy out...
http://newimportspeedshop.net/
Got parts from there for my beetle, will see how he is with my mazda once i start building it
Got parts from there for my beetle, will see how he is with my mazda once i start building it
Full Member
Joined: Feb 2010
Posts: 52
Likes: 0
From: Magic City, FL
Hi guys maybe someone can help me out,,,, I had a young guy in the Miami, FL area which worked on my RX7 named Curtis... He drives a white mazda miata, i know he use to work at one of the local area Mazda dealerships.. I know a couple of months ago he started working at a shop by Tamiami Airport on SW 137 AVE, SW 120 ST.
Can someone assist me find this guy out...
Can someone assist me find this guy out...
whats up if this guy Curtis does good work and you find him, post the info so the Miami crowd can have a good rotary mechanic
Guys I live on the Mississippi coast and need a good rotary mechanic to look at my 7. Who is the closest that is a good mechanic and won't jerk me around? I have seen several shops listed in the central FL region but wondered if there is anyone closer. Thanks.