I have a 13BRE sitting on a pallet.
We could start with that.
Some guy left it there. I don't think he wants it anymore.

 

If thats the case then go ahead and build it with a half-bridge and i'll take it off your hands....there'll be plenty of burgers, ribs and chicken waiting on you....

 

This is the final list for the following people that I received the checks from:

S. Alvarez
Simon & Mark
R Evanson
D. Bern
J. Castleberry
Frank (Kandela)

We now have a total of 7 people on the list. If anyone wants to be on standby, please add yourself in here on the standby list so that I know who will be the first person on it after the 7 people listed above. I can only add up to 3 people on standby so far but it really depends on how well I can go through the rest of the cars.

Standby list:

1.
2.
3.

 

This is the final list for the following people that I received the checks from:

S. Alvarez
Simon & Mark
R Evanson
D. Bern
J. Castleberry
Frank (Kandela)

We now have a total of 7 people on the list. If anyone wants to be on standby, please add yourself in here on the standby list so that I know who will be the first person on it after the 7 people listed above. I can only add up to 3 people on standby so far but it really depends on how well I can go through the rest of the cars.

Standby list:

1. Gio (sinister7)
2.
3.

 

Standby list:

1. Gio (sinister7)
2.Chris (Rotorlution)
3.

 

Standby list:

1. Gio (sinister7)
2.Chris (Rotorlution)
3.Bader (BeNO)

 

Standby list:

1. Gio (sinister7)
2.Chris (Rotorlution)
3.Bader (BeNO)
4.orlando (danameisoj)

 

is this hurricane going to affect anything? I know its only a storm but on the other coast (where I am) even after being hit by a tropical storm sometimes some areas lose power for a few hours and some lose it for a few days..... how is it over there in Ft. Lauderdale?
Joe C

 

i highly doubt it will affect anything...but you never know :\

 

we have good tuner in miami like crispeed,lopez racing,they now how tuning a rotary engine.

 

what is the address of this place? and what time does this start ?
thanks
Joe C

 

Not sure of start time but the address is....
2021 SW 70th Ave
Davie, Fl

 

Are you going to be there?

 

Does anyone happen to have laying around a secondary fuel rail and 1600cc injectors, FPR, and resistors, fittings, etc etc(basically I need the RX7store extreme fuel kit) that I can buy and pay to have overnighted? As timely and reliable as the RX7store is, my parts wont be coming in time, I KNEW this would happen and I specifically emailed them and asked them if they had the stuff in stock and when I would get it, and of course it shipped out the day I was supposed to get it, and instead of three days it's taking a WEEK, so there goes that, I know how reliable the store is so I should have just done next day anyway, but from the email I got I thought maybe they had it all together there. I also need a 3bar MAP sensor.
Any help would be appreciated or else I guess I'll have to settle.

Joe C

 

Yeah i'll be there.....

 

so whats the story with the people on the standby list.

do we need to show up or since im the 4th on the list should i just forget about it?

 

also what time does this start because when my fuel stuff comes I'm going to try to cram it in, and nothing ever goes smoothly or as expected so I am thinking I'll be there later in the day on saturday....
Joe C

 

So what time are you guys planing on starting on sat, I am going to show my support. Good luck preping your cars.

 

Anybody knows where the dyno is taken place? I haven't heard back from Simon yet since I think I'll be staying over at his place this weekend. I think we should start as early as possible. either 8 or 9am until we are done for that day. As for the standby list, you'll most likely be on the sunday tune if it happens. Alot of this will be driven by the amount of people get done on Saturday.

Again, Like I said in my earlier reply, there are no guarantee on those who are on the standby list. Only those who put the deposit in gets the priority.

 

i believe it's going on at CAR-TEK in davie. pretty sure.

i will also be there to spectate and see how it goes.

will anyone be getting their rtek tuned? i'm interested to see how they are.

 

Steve. If you dont hear anything from Simon let me know. you are more than welcome to stay at where I am staying. let me know. I am still installing my MSD I'll finish it by tomorrow.
Send me your flight number and arrival time to pick you up.

My number is (407)929-2299 Beno

 

Dyno is taking place at Cartek Tunning in Davie. It is right around the corner from the Tower shops. Cartek will open at 10AM on Saturday, therefore tunning will start at that time.

Steve I got your flight info and i'll be there on Friday to pick you up from the airport.

Simon

 

thanks! will seeya tomorrow night.

 

I dont think I can make the tune. If anyone on the standby list can cover my deposit $ you can have my spot. Let me know. Thanks-- Ryan

 

Ryan sorry to hear you wont make it, I also had to ask Mike Lowe for some last minute work, and they said I was the reason why they couldnt get work done on your car, Mike actually JUST finished it up now. I actually came back on here and was going to ask about a guy named Ryan, I was hoping to drive over with someone.
anyway I wish I knew you because if what you needed wasnt too involved I could have helped you, or I could have directed you to a guy in Punta Gorda that is a whiz with 2nd and 3rd gens.
later
Joe C

edit: hey Ryan just noticed you Pm'd me, sorry I have been away from the computer getting stuff together and of course ran into problem after problem, just got back from Lowes automotive and now have a few other things to do- wish I could have helped you out.