Kan tuning in Florida...anywhere
#76
Eats, Sleeps, Dreams Rotary
iTrader: (19)
Originally Posted by Kandela
As Simon posted im in. send me the info as to where to send the check.
Im to lazy to scroll the pages.
Im to lazy to scroll the pages.
Just send a downpayment check of $200, payable to Steve Kan at
Gotham Racing
ATTN: Steven Kan
5621 Main Street
Watauga, TX 76148
#85
Eats, Sleeps, Dreams Rotary
iTrader: (19)
Originally Posted by phinsn98
Simom are you still going?
1.) Papsmagu - Simon
2.) Mark
3.) Phinsn98
4.) J Castleberry
5.)
6.)
#86
Rotary Freak
Join Date: Feb 2001
Location: fort worth, tx, usa
Posts: 1,926
Likes: 0
Received 0 Likes
on
0 Posts
Sept or Oct is fine by me. As long as I don't have other conflicts. I think there's a tuning session in L.A. on the 7 stock weekend but other than that, I don't think there's anything else.
Originally Posted by papsmagu
Yup.....sent check for two people. myself and a freind mark. Lets start a list of how many people have sent checks. steve when do you want to set this up for, i believe we have enough people.
1.) Papsmagu - Simon
2.) Mark
3.) Phinsn98
4.) J Castleberry
5.)
6.)
1.) Papsmagu - Simon
2.) Mark
3.) Phinsn98
4.) J Castleberry
5.)
6.)
#88
Full Member
Thread Starter
can we please get this sooner than later, my car is running SO crappy, it stumbles, it stalls, I cant boost, its running so rich that if this happens in October my engine will be all carboned up
But if Steve or anyone is reading, if I am aiming at 420whp at 16 or so psi, with the GT35R, are 550primaries and 1300cc secondaries sufficient, or will I need to turn boost up and get the GM map sensor and bigger secondaries and FPR etc? or do I need more fuel even at 16psi?
thanks
Joe C
But if Steve or anyone is reading, if I am aiming at 420whp at 16 or so psi, with the GT35R, are 550primaries and 1300cc secondaries sufficient, or will I need to turn boost up and get the GM map sensor and bigger secondaries and FPR etc? or do I need more fuel even at 16psi?
thanks
Joe C
#92
Rotary Freak
Join Date: Feb 2001
Location: fort worth, tx, usa
Posts: 1,926
Likes: 0
Received 0 Likes
on
0 Posts
We EMS are you running? I think 550/1300 is not enough. You really need bigger secondary injectors or primary for some safety margin.
I would recommend getting a 3 bar sensor so that it'll give you a linear boost reading.
I would recommend getting a 3 bar sensor so that it'll give you a linear boost reading.
Originally Posted by zydeco king
can we please get this sooner than later, my car is running SO crappy, it stumbles, it stalls, I cant boost, its running so rich that if this happens in October my engine will be all carboned up
But if Steve or anyone is reading, if I am aiming at 420whp at 16 or so psi, with the GT35R, are 550primaries and 1300cc secondaries sufficient, or will I need to turn boost up and get the GM map sensor and bigger secondaries and FPR etc? or do I need more fuel even at 16psi?
thanks
Joe C
But if Steve or anyone is reading, if I am aiming at 420whp at 16 or so psi, with the GT35R, are 550primaries and 1300cc secondaries sufficient, or will I need to turn boost up and get the GM map sensor and bigger secondaries and FPR etc? or do I need more fuel even at 16psi?
thanks
Joe C
#95
Eats, Sleeps, Dreams Rotary
iTrader: (19)
Originally Posted by Kandela
Sent check today
1.) Papsmagu - Simon
2.) Mark
3.) Phinsn98
4.) J Castleberry
5.) Kandela - Frankie
6.) Dalandlord
7.)
#97
Eats, Sleeps, Dreams Rotary
iTrader: (19)
Originally Posted by salva
Hey Simon, sent mine yesterday.
1.) Papsmagu - Simon
2.) Mark
3.) Phinsn98
4.) J Castleberry
5.) Kandela - Frankie
6.) Dalandlord
7.) Salva - Noel
8.)
#98
I am looking to make not less than 450whp with a GT4088, I have 1000cc primary, 1600cc secondary and One in-tank supraTT pump. stock fuel line up to the fuel filter , Stock ignition. everything else is upgrade! will it make it or not ?
Any Suggestions or comments ??
Any Suggestions or comments ??
#99
Full Member
Thread Starter
do we have a tentative date that Steve has agreed on? and Steve if you are reading this, I have the PFC, but with 550cc primaries and 1600cc secondaries, do I need a FPR or am I good to go?
thanks
JOe C
thanks
JOe C
#100
Rotary Freak
Join Date: Feb 2001
Location: fort worth, tx, usa
Posts: 1,926
Likes: 0
Received 0 Likes
on
0 Posts
Here're the following people that I received the checks from:
S. Alvarez
Simon & Mark
R Evanson
D. Bern
J. Castleberry
I think if you guys want, I can do it on either the 9th of sept weekend or the 30th of sept weekend.
Let me know so that I can mark my calender.
S. Alvarez
Simon & Mark
R Evanson
D. Bern
J. Castleberry
I think if you guys want, I can do it on either the 9th of sept weekend or the 30th of sept weekend.
Let me know so that I can mark my calender.