You oughta get that thing on a dyno. Cuz if you really are at 400hp with your setup then you've probably set some records and peeps can learn from that. I'm at 15psi right now too and would be surprised if I'm pushin more than 300 rwhp.

If I make it to next sundays meet we gotta do some runs, I raced a couple 450+ hp rx7's this weekend and they wouldn't pull me hard until top of 3rd and on to 4th. Top mount does have it's advantages, but anyway, if you pull me up top then u just might be right

 

Anthony, you have to remember your not comparing apples to apples. You have a stock port 8.5 compression engine. I am running 9.4 compression with a massive street port. You car wieghs about 500 pounds more also.

90% of the time the AFRs were between 14.4 and 14.7. It was hard driving the car with only bearly touching the throttle. Long wonders why I wanted to stay with a S5 N/A trans, it's called a tall overdrive

 

Finally!!!!! A street first gen to hit over 1000hp!!!!!!!

http://www.youtube.com/watch?v=kNcdMGm_Jsk

 

Quote (Finally!!!!! A street first gen to hit over 1000hp!!!!!!!)
LOL Hey If I put a 300hp shot of nos and my boost wide open I bet I could
make 1000hp onetime LOL hahahahaha

 

And that 20b is just a Half bridge Not a full! LOL

 

So........Explain to me why you would waste your time half bridging a 20B?

 

just saying that if it done that good then it would been killing it if it was a full BP

 

Whats up guys? Are you meeting this weekend? If so what day, time, address. I'm looking to come for the first time.

 

Cool deal. This Sunday. 1:00 pm(ish). Buger King on Williamson RD. Mooresville. Exit 36.

Burger King 267 Williamson Road, Mooresville, NC http://maps.google.com/maps?hl=en&tab=wl

 

Well My car is looking GREAT!! Here is some Sneak peek pics Of it.
And just think It's not even been cut and buffed.

 

Freakin sweetness!!!!!!!!!!!!!!!!!!!!!!!

When you was telling me about the hood, I was having a hard time picturing it. WOW. That is insane!!!!!!!!!!!!

 

Wow!! That's VERY unique!! Can't wait to see it in person Josh! Did you do that yourself?

 

well went to mooresville tonight and ran the car. @ 7psi i ran a 8.8 @ 78mph 1.9 60 foot 5.6 half track. im really pleased with where this is going. haltech and tune coming soon. Josh, the car looks awesome. Not necessarily my cup of tea with the airbrushing but whoever did it did an excellent job.

 

Josh That airbrush job looks great!!!!

 

Thanks man here is one more pic LOL I'm saving it for all to see at the meet

 

that paint job looks good man, i've been making plans to finally repaint the car and was thinking of doing something similar to that rotor you have on the side, but on the hood.

 

Wow looks like ima make this meet ..long wow that hoods def make u stand out lol don forget ta bring tha fuel reg Oh is tha robo rotor man pullin tha rotor out his chest or the vent in hood? Saw tha out line on his chest

 

ill be there. no hood but ill be there lol

 

No hood? What's up with that?

I will not be able to hand around much tomorrow, but I will be making an appearance. I will have the little boy with me, so I cant go play

Anywho, I am going to be picking up a '96 Plymouth Gand Voyager. Long story about this one. Short story is I am getting it for $500. The good part is, the thing looks and runs awsome. The bad part is, I am going to have to rebuild the transmission. O'well, it's always something

 

ill put the vids up as soon as im done edditing em but man i wish i was in japan love to see this stuff ata meet tho its not tecnicly the real 78 but owell haha rofl

http://www.youtube.com/watch?v=AQOinskUF38

 

Thanks to all who gave props to my car. It was a lot of work but it shows.
Aspirao and to all Sorry I had to run but I had a B-Day party I had to atiend. LOL
Manny I found the reg that you need so give me a call, and dont forrget
to post up the vid of me living.

 

Hey all,
I'm installing an aftermarket power antenna that only has 3 wires: blue, red, and black (ground). Does anyone know if I can patch this in thru the harness in the trunk? If so, what goes where and do I need to install a crossover relay for the trigger? The head unit is aftermarket also. Thanks for any info y'all can give.

 

Thanks again to all who came out today. We had a good turnout. I will post up pics when I get a chance. Long, big props to ya man. The FB is looking WAY better. Especially in person. Your right though, it's all paying off

 

well it was a good turnout. thanks to everyone who followed my limping rotary home lol. fortunately after tearing down the engine the cause of the problem was a blown exhaust mani gasket that allowed cold air to draw in and hit the apex seal and shattered it. but on the brighter side it did it at the exhaust port so it did absolutely no damage to the housing or rotor. but thanks again to john and ant for followin me back. should be back on the road in a week or so.

 

Although my arrival was a bit tardy!!!! It was good to see the second gens. It was a pleasure meeting everyone. Hope to see all next time. Josh I know I said it before but the air brush is insane!!!!!