Nice find Sam!

 

http://s36.photobucket.com/albums/e2...0730091813.flv

 

The Jeyota is turning out to be a contender. Looking good Josh.

 

Nice car sam! mine's cooler :-P haha if you need some wheels on the back there i got a set. Hopefully the car will be on the road middle or so of next week. if all goes well i may be able to take it to the lakehouse meet!

Josh, that truck is badass, its alot cooler in person

 

Thanks, but I have the whole set with new tires. I have them off to try and free up the rear brakes. Hopefully the tank will clean up nicely.

 

ya hopefully, i know where there is another one if ya end up needin one

 

Hey dave how does thursday sound for getting that welding done? ill wait to buy the adapter until after u look at it.

 

http://www.rx7store.net/product_p/apexiintakefc.htm

Just wondring do you guys think that this would work ok on my 7? looking for a second opinion before i buy.

 

I personally wouldn't waste my money on the brand name filter. Just go on ebay and pick up a 3" filter, I got mine for 15$ shipping was like $17, lol. Noticed a huge difference once all that restrictive stock piping was gone.

 

well remember i still have the smog pump what about the hose that runs to the stock airbox?

 

dj i think its time to ditch your smog pump, just ask manny what happens when a smog pump fails... it locked up, broke the bracket, busted two of his omp lines, and smashed the shroud, yeah you tell me if thats something you want on your engine. just rip it off, get a dual alt pulley(i sell them of course, not a fan of the yohoo belt) and call it a day, it will save you the headache

 

Good point andre, is it hard to take off? ant u wanna give me a hand in taking this off?

 

It is a matter of 2 bolts to remove the pump.

 

really? are there any hoses besides the one to the air box? i think there is an extra hose that runs to the aircontrol valve. what would i do with that?

 

So dave is thursday ok to do my muffler? and i really hate to ask but if you want can we do the smog pump while im over there doing the muffler?

 

I will play devils avocate and say YOOHOO FTW.

I run one and it has saved me before.

 

Thursday is fine. And yes YOU can take off the pump while you are here

 

I wasnt trying to make YOU take it off, i was just trying to make sure that when I take it off i take ALL of it off. do i need to buy anything before I take it off like a block off plate or anything?

What time thursday? what would u like for me to do about the reducer, u want m to wait so u can look at it first?

 

Do you have the muffler in hand yet? When you do let me know what size pipe it is, and what size the rest of your exhaust is where it is being mounted. If it is the 3 inch pipe and a 2 1/2 inch pipe, you will need the reducer regardless. If Advanced doesn't have it by some chance any muffler shop can make or sell you one. Let me know the sizes and I will check the stores locally and with my cousins muffler shop.

Seriously, 2 bolts and it is all removed....ok 5 if you remove the adjuster brackets as well.

Any time is good for me. Earlier in the day is best due to the heat. Like 10;30 -12 ish Or whatever works but that is my preference

 

IT'll be here monday.The muffler will be put on the driver's side of the rear bumper where my current one is, the piping is 3 1/2 on my car and the pipe on the muffler is 2 1/2 because the piping on the car it came off of was 2 1/2. i was told that if you can't find one you could always get two reducers that go from 2.5 to 3 and then 3 to 3 1/2.

I just needed to make sure i didn't need to buy a block off plate for when i remove the air pump because i didn't know whether or not the air control valve would need to be removed.

I'll probably be over at your house around 11.

Thanks again man.

 

Does it have exhaust hangers on it? If not you will need to grab a universal strap-on hanger..or some weldable rod to make some. Again I can check with my cousin if you can't find some by then. Let me know.

 

Respeed also has dual sheave alt pulleys cheap.

Hey Sam, if you need any GSL-SE hardware (ECU, harness, fuel rail, injectors, AFM, manifolds, sensors, etc) just let me know. I've got a spare of nearly everything.

 

im not sure but i know the muffler thats on there now has one. how much is that reducer gonna cost?

 

i think i may just buy two reducers because i dont think were gonna be able to find a reducer that goes from two and a half to 3 and a half so if its cool with you i'll just go out and buy two one that goes from 3.5 to 3 and one thatgoes 3 to 2.5

 

Hey dave i was told you can just cut th piping off the back of the muffler and just cut a 3 1/2 inch hole in the back of it and then weld the piping to it. do you think we could just do that?