Chattanooga TN area Rx-7's
#203
Full Member
Thread Starter
#205
Full Member
Thread Starter
No, they are used coils. I'll have to get them out and see what all there is. I'm sure they are all most likely NA. They've been stored in my garage for a long time.
$40 a coil.
I'm going to try to get them all out of the garage this weekend and go through them.
$40 a coil.
I'm going to try to get them all out of the garage this weekend and go through them.
Last edited by thumpgun; 06-01-17 at 03:51 PM.
#206
Full Member
Thread Starter
6 Trailing coils (EZ)
5 Trailing coils (AZ)
6 Leading coils (BZ)
6 Series 4 mass air meters
4 Denso bypass air control valves
1 set 10th Anniversary tail lights
1 beehive 12A oil cooler
2 sets rotors
Series 4 rear bumper cover
NA 13B rotor housings, plates
2 oil pans
some exhaust manifolds
few other various parts
5 Trailing coils (AZ)
6 Leading coils (BZ)
6 Series 4 mass air meters
4 Denso bypass air control valves
1 set 10th Anniversary tail lights
1 beehive 12A oil cooler
2 sets rotors
Series 4 rear bumper cover
NA 13B rotor housings, plates
2 oil pans
some exhaust manifolds
few other various parts
#208
Full Member
Thread Starter
I haven't heard from anyone on this thread since posting the parts. So I'm going to post them elsewhere now too.
There's also more parts I didn't list or photgraph.
I wanted to give local area people a chance to get them first. If interested in any of it or all of it. You can contact me here on the thread, or message me.
There's also more parts I didn't list or photgraph.
I wanted to give local area people a chance to get them first. If interested in any of it or all of it. You can contact me here on the thread, or message me.
#210
Full Member
Thread Starter
We saved them all from a shop I used to work at that was all rotary repair.
They have all been stored in my garage for many years. Then moved outdoors stored off the ground on plastic pallets and under tin.
They were all still usuable is why they were kept. They of course would need to be cleaned and polished.
You are welcome to look at all of the parts and make an offer on them.
We can arrange a day and time for you to come and see them. Just PM me your phone number and I'll send you mine so we can get it set up.
They have all been stored in my garage for many years. Then moved outdoors stored off the ground on plastic pallets and under tin.
They were all still usuable is why they were kept. They of course would need to be cleaned and polished.
You are welcome to look at all of the parts and make an offer on them.
We can arrange a day and time for you to come and see them. Just PM me your phone number and I'll send you mine so we can get it set up.
#211
Junior Member
Join Date: Mar 2017
Location: SIGNAL MOUNTAIN TN
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
6 Trailing coils (EZ)
5 Trailing coils (AZ)
6 Leading coils (BZ)
6 Series 4 mass air meters
4 Denso bypass air control valves
1 set 10th Anniversary tail lights
1 beehive 12A oil cooler
2 sets rotors
Series 4 rear bumper cover
NA 13B rotor housings, plates
2 oil pans
some exhaust manifolds
few other various parts
Attachment 603276
5 Trailing coils (AZ)
6 Leading coils (BZ)
6 Series 4 mass air meters
4 Denso bypass air control valves
1 set 10th Anniversary tail lights
1 beehive 12A oil cooler
2 sets rotors
Series 4 rear bumper cover
NA 13B rotor housings, plates
2 oil pans
some exhaust manifolds
few other various parts
Attachment 603276
#214
Full Member
Thread Starter
Hello everyone. I have finally sold my last RX-7 and the majority of the parts I had stored. I still have more left and would rather sell than scrap them. They are listed on facebook marketplace and you can contact me through there. I check back here periodically but not much activity for a long time.
These are all used parts and are sold AS IS with NO WARRANTY or GUARANTEE.
They have been stored for many years and need cleaned and/or refurbished. NO TURBO PARTS or GSL-SE PARTS.
A few 12A but mostly 13B parts. NO TURBO PARTS or GSL-SE PARTS.
Priced cheap to move $500 for all or prices individually as follows.
(1 total) Mazda RX-7 FC3S 86-91 Rear differential (M055 1) $200
(3 total) S4 mass air meters $50 each
(11 total) FC coil packs Trailing $50 each
(6 total) FC coil packs Leading $50 each
(16 total) 13B rotor NA rotor housings (these will need refurbished, some edge flaking or gouges) $35 if you buy all $20 each
there are a couple of 12A housings but very rough.
(43 total) assorted front/center/rear plates (side housings/irons) they need cleaned and resurfaced $35 each
FC coupe door glass $50 each (only right side)
FC coupe power window regulators $50 each
FC rear bumper cover $100
(3 total) 91 FC turbo wheels $50 for 3 (rough condition)
(1 total) FC 4 lug base aluminum spare wheel $50
(5 total) idle air control valves $20 each
(1 set) 1988 FC 10th Anniversary tail lights $50 (some chipped corners)
(3 total) FC oil pans $20 each
(3 total) FC AC compressors $50 each
(3 total) FC NA throttle body and intake $50 to $100 each
(3 total) FC oil cooler $50 each
(1 total) 12A beehive oil cooler $50
(2 sets) FC sun visors $50 set
(1 total) FC radiator $20
(3 total) 12A rotors $50 each
(4 total) 13B rotors $20 each (scratched and gouged)
$500 for all or priced each.
*Also available NOT INCLUDED with above lot if sold as a whole.
(5 total) FB factory 4x110 aluminum wheels $125 for all 5
These parts have been stored and will need to be cleaned. They are good used parts saved from former rotary business. They are priced much cheaper than most anything online. Out of the rotary game after two decades.
Located in Cleveland, TN
Mazda, Mazda RX-7, RX7, rotary engine, FC RX7
These are all used parts and are sold AS IS with NO WARRANTY or GUARANTEE.
They have been stored for many years and need cleaned and/or refurbished. NO TURBO PARTS or GSL-SE PARTS.
A few 12A but mostly 13B parts. NO TURBO PARTS or GSL-SE PARTS.
Priced cheap to move $500 for all or prices individually as follows.
(1 total) Mazda RX-7 FC3S 86-91 Rear differential (M055 1) $200
(3 total) S4 mass air meters $50 each
(11 total) FC coil packs Trailing $50 each
(6 total) FC coil packs Leading $50 each
(16 total) 13B rotor NA rotor housings (these will need refurbished, some edge flaking or gouges) $35 if you buy all $20 each
there are a couple of 12A housings but very rough.
(43 total) assorted front/center/rear plates (side housings/irons) they need cleaned and resurfaced $35 each
FC coupe door glass $50 each (only right side)
FC coupe power window regulators $50 each
FC rear bumper cover $100
(3 total) 91 FC turbo wheels $50 for 3 (rough condition)
(1 total) FC 4 lug base aluminum spare wheel $50
(5 total) idle air control valves $20 each
(1 set) 1988 FC 10th Anniversary tail lights $50 (some chipped corners)
(3 total) FC oil pans $20 each
(3 total) FC AC compressors $50 each
(3 total) FC NA throttle body and intake $50 to $100 each
(3 total) FC oil cooler $50 each
(1 total) 12A beehive oil cooler $50
(2 sets) FC sun visors $50 set
(1 total) FC radiator $20
(3 total) 12A rotors $50 each
(4 total) 13B rotors $20 each (scratched and gouged)
$500 for all or priced each.
*Also available NOT INCLUDED with above lot if sold as a whole.
(5 total) FB factory 4x110 aluminum wheels $125 for all 5
These parts have been stored and will need to be cleaned. They are good used parts saved from former rotary business. They are priced much cheaper than most anything online. Out of the rotary game after two decades.
Located in Cleveland, TN
Mazda, Mazda RX-7, RX7, rotary engine, FC RX7
Thread
Thread Starter
Forum
Replies
Last Post
RotorsRulePistonsDrool
NW RX-7 Forum
15
03-19-14 02:00 AM