It was just posted yesterday and I was the first viewer! LOL WOW!!! Anyways any idea who built this? Never seen anything like it, using 2 rew intake manifolds... It is like 2 rew motors together, literally... Good stuff

<object width="480" height="295"><param name="movie" value="http://www.youtube.com/v/A2nuYyMIVao&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/A2nuYyMIVao&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="295"></embed></object>

 

that ***** crazy

 

right that sounds like **** just my 2c

 

i think its pretty cool. does not sound the best though. i agree with ^

 

Needs at the minimum.

- Proper tubular exhaust manifold.
- Nice sounding exhaust.
- Proper intake manifolds
- Retune.

I think it will sound much better. Intake/Exhaust manifold work can do wonders for a car's sound.

 

Nice, now where are the turbo's

thewird

 

indeed! Twin Turbo or wait, giant single turbo! Ohh yeah it does sound bad but cool nonetheless! Don't see 4 rotors everyday and the guy has a 3 rotor as well in an another vid.

 

more info on this please? What is going on here?

 

Weird sound. I wonder what type of power he's putting down.

 

I'm guessing they bought the 4 rotor e-shaft kit, got 2 13b's and a 20b center iron and put it all together. Looking at the video again, that exhaust header seemed to be build either in an extreme hurry or someone who had no idea. Its poor design. Regardless, very nice project

thewird

 

It looks like the exhaust is nearly stock judging by the exhaust dual tip.

I Wouldnt expect this to sound like a 26b neither. ITs not peripheral. WHo knows what they did witht he intake ports. BUt, who cares this **** is interesting.=D

 

Thats cool!

 

WTF!!!!Lol u dont c that everyday

 

awesome.

 

that guy gets 20 cool points

 

That's something I though I'd never see.......a pair of UIM and LIM in the same engine bay......

 

nutty...

 

awesome. the engine looks like...mike tyson's punchout

 

ok so, still wondering, what is going on here? Any explanation on how this is done? Are the rotors all at different angles or are they firing in pairs?

 

What a rough exhaust manifold. I could build a better one on a trampoline in an elevator.

 

The fact that it runs is a miracle! Not exactly what I was expeting, but this is the one I was hearing about. Still cool regardless.

 

This is what the owner wrote in the description on youtube,"This was a project that took about five years of weekends to put together. There was a lot of trial and error as jury-rigged parts were improvised and revised, leaks were identified and plugged, and byzantine electrical diagrams were decoded. It still does not run smoothly, as there likely is a problem with the intake system that has prevented smooth timing at idle. But she runs!" And in the comments it says,"The eccentric shaft was special ordered from a shop in Australia. It is a single piece and defines the cycle of all four rotors." and also it has a microtech EMS

 

fram oil filter FTW!! lol