Rtek installation

Reply Subscribe

Thread Tools

Search this Thread

Nov 9, 2009 | 02:26 PM

deadly 2

Thread Starter

can't be stopped

iTrader: (1)

Joined: Sep 2007

Posts: 103

Likes: 0

From: socal/ burbank

installation

how difficult is it to install yourself and what tools are needed

Nov 9, 2009 | 05:55 PM

tigerbite

Full Member

Joined: Jul 2007

Posts: 78

Likes: 0

From: Sweetness, MN

What version of Rtek? 1.x or 2.x?

Nov 9, 2009 | 11:32 PM

AUGieDogie

Rotary Freak

iTrader: (4)

Joined: May 2003

Posts: 1,587

Likes: 4

From: seattle

Install of the chip should be pretty easy for the 1.x series. 2.x is not an option must send away the ECU.

Nov 9, 2009 | 11:35 PM

Boosted11

Pistons are gay

iTrader: (11)

Joined: Dec 2006

Posts: 1,973

Likes: 0

From: Prince George, BC

If your asking that, I highly recommend a known rotary tuner in your area. For installation and tuning.

Nov 10, 2009 | 04:13 PM

turbo2ltr

Rotary Enthusiast

iTrader: (1)

Joined: Jul 2003

Posts: 1,328

Likes: 7

From: ..

The instructions for installation are on our site. Click the RX7 button at the top, and the instructions are on that page towards the bottom.. So you can see directly what's involved.

Reply Subscribe

Related Topics

Thread

Thread Starter

Forum

Replies

Last Post

New Greddy Profec Install problem, 12psi on OFF

24seven_dada

3rd Generation Specific (1993-2002)

Nov 10, 2018 12:03 PM

hogged out vs boost prepped (Nikki)

Jeff20B

1st Generation Specific (1979-1985)

Sep 16, 2018 07:16 PM

clutch/ pressure plate issue

sinclair7seven

General Rotary Tech Support

Sep 11, 2015 10:15 AM

Radio harness power

astrum

2nd Generation Specific (1986-1992)

Sep 7, 2015 11:41 PM

Flywheel not moving after trans install

Enzo1944

New Member RX-7 Technical

Sep 6, 2015 08:57 AM

Reply Share

First
Prev
1 / 1
Next
Last