AUGieDogie

iTrader: (4)

So my 87 turbo was a bit flooded and I noticed that the anti flooding function didn't seem to be working. I noticed that my TPS was only reading 93% soooooo when does it kick in? I had to pull the fuse to get it to start.

arghx

iTrader: (3)

I thought it only worked on s5 cars?

solareon

iTrader: (1)

supposed to be a feature on the s4 cars as well. I thought it wasn't until it was 100% or like 99%. gotta ask turbo2ltr

Nick_d_TII

iTrader: (6)

I know mine TPS goes to like 92%, but it works when I hold my foot to the floor and crank, or at least I think it does, it fires up when it seems slightly flodded?... It seems like if I step on the gas while its cranking it cuts fuel too... sometimes requires me to fiddle with the pedal a little but it starts everytime.

turbo2ltr

iTrader: (1)

If I recall correctly the trigger point is 50%

AUGieDogie

iTrader: (4)

Alrighty then, so does it cut ALL fuel. I'm getting 1.5ms pulse on my injectors with the accelerator pressed to the floore (93%)

sharingan 19

iTrader: (16)

Would be nice to know.... That feature does not work on my car. The TPS sees 74% max, which I thought was the problem, but if its supposed to trigger @ 50% that should be a non-issue. I still have my fuel cut switch hooked up, so its not that big a deal, but it would be nice to use the ecu feature instead.

s30z

i have the same problem, so anyone know the correct tps reading for the flood clear feature?

RotaryRocket88

iTrader: (7)

It's on stock S5 ECUs only, but S4 Rtek'd ECUs have it added on.

It works on my car with the TPS reaching 94% max, but I have rarely needed to use it. Once you get enough fuel out of the start map, it shouldn't flood anymore.