Hit the strip Friday w/mixed results
#1
Original Gangster/Rotary!
Thread Starter
iTrader: (213)
Hit the strip Friday w/mixed results
Mods listed below, 10# primary, 13# secondary, 30 psi of pressure in 245/45 Potenza S02pp's on stock rims.
60ft--------2.997
1/8 ET------9.6
1/8mph----88.6
1/4 ET-----14.03
1/4 mph---112.xx
This run was with no launch b/c I'm afraid of blowing up my rear diff. Also, my synchros in 2nd, 3rd and 4th are all grinding so I can't powershift. Also, my Tanabe suspension was way too stiff; next time I'm going to soften it.
Well, what do you guys think? W/a good launch and strong tranny, am I looking at mid 12's here?
P.S. My buddy said I was shooting flames going down the track
60ft--------2.997
1/8 ET------9.6
1/8mph----88.6
1/4 ET-----14.03
1/4 mph---112.xx
This run was with no launch b/c I'm afraid of blowing up my rear diff. Also, my synchros in 2nd, 3rd and 4th are all grinding so I can't powershift. Also, my Tanabe suspension was way too stiff; next time I'm going to soften it.
Well, what do you guys think? W/a good launch and strong tranny, am I looking at mid 12's here?
P.S. My buddy said I was shooting flames going down the track
#3
Junior Member
Join Date: Mar 2001
Location: San Fran freaking Cisco
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
hoo-ah just look at that trap speed!
indicates big HP to me.
drivetrain needs attention.
good luck from a card carrying member of the (I broke a) halfshaft club!
ps. no fair not posting reaction time :P
indicates big HP to me.
drivetrain needs attention.
good luck from a card carrying member of the (I broke a) halfshaft club!
ps. no fair not posting reaction time :P
#4
Full Member
Join Date: Mar 2001
Location: Riverside/Sacramento
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
You should be able to hit low 12s! I trapped a 13.0@111.1mph with just intake, full exhaust, and PFC w/ base maps and 14psi. That was in 90F So. Cal heat. I used Nitto 555Rs.
Slaps some drag radials on and go weeeee all the way down the track.
Slaps some drag radials on and go weeeee all the way down the track.
#5
Living life 9 seconds at a time
iTrader: (2)
Join Date: Feb 2001
Location: Abingdon, Md
Posts: 6,541
Likes: 0
Received 0 Likes
on
0 Posts
I ran a 12.1 @ 112mph..... so your right there. I also had a 1.69 60' on drag radials so that helped too. Also, if your shooting flames the whole way down the track, your running too rich. You ought to dyno tune your Power Fc when you get the chance. Dave programs it very rich to be safe.
Ernie
Ernie
#6
Banned. I got OWNED!!!
Join Date: Apr 2005
Location: Belleville, IL
Posts: 5,506
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GoodfellaFD3S
Mods listed below, 10# primary, 13# secondary, 30 psi of pressure in 245/45 Potenza S02pp's on stock rims.
60ft--------2.997
1/8 ET------9.6
1/8mph----88.6
1/4 ET-----14.03
1/4 mph---112.xx
This run was with no launch b/c I'm afraid of blowing up my rear diff. Also, my synchros in 2nd, 3rd and 4th are all grinding so I can't powershift. Also, my Tanabe suspension was way too stiff; next time I'm going to soften it.
Well, what do you guys think? W/a good launch and strong tranny, am I looking at mid 12's here?
P.S. My buddy said I was shooting flames going down the track
60ft--------2.997
1/8 ET------9.6
1/8mph----88.6
1/4 ET-----14.03
1/4 mph---112.xx
This run was with no launch b/c I'm afraid of blowing up my rear diff. Also, my synchros in 2nd, 3rd and 4th are all grinding so I can't powershift. Also, my Tanabe suspension was way too stiff; next time I'm going to soften it.
Well, what do you guys think? W/a good launch and strong tranny, am I looking at mid 12's here?
P.S. My buddy said I was shooting flames going down the track
#7
Original Gangster/Rotary!
Thread Starter
iTrader: (213)
Originally Posted by LUPE
2.997 60' !!! I don't think I've ever seen that before
Trending Topics
#12
Eats, Sleeps, Dreams Rotary
iTrader: (71)
Join Date: Mar 2004
Location: Northern VA
Posts: 4,230
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LUPE
Don't you agree that we need a drag forum to put all these threads in? I do!
I love how half the 3rd gen specific threads on the first page are related to drag racing at the moment...lol
#17
Banned. I got OWNED!!!
Join Date: Apr 2005
Location: Belleville, IL
Posts: 5,506
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FDNewbie
You guys already have one! It's called the Mustang forum...
#19
Banned. I got OWNED!!!
Join Date: Apr 2005
Location: Belleville, IL
Posts: 5,506
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FDNewbie
That's not our problem, is it? Don't mind me...I just frown on FD's being used at the drag strip. Rubs me the wrong way. Waste of an incredible hardcore performance machine, not a drag box on wheels
#21
Banned. I got OWNED!!!
Join Date: Apr 2005
Location: Belleville, IL
Posts: 5,506
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FDNewbie
It's not a circle. It's tons of turns. I don't think Nascar allows FD's on the track...
#23
Senior Member
Join Date: Dec 2004
Location: In your wheelhouse
Posts: 502
Likes: 0
Received 0 Likes
on
0 Posts
Seriously LUPE, I read that post right after you drug it up this afternoon and all I could think was - what got into him??
I didn't want to be the first to say something.
By the way Michael Savage is great - he's completely psychotic.
I didn't want to be the first to say something.
By the way Michael Savage is great - he's completely psychotic.
#24
Banned. I got OWNED!!!
Join Date: Oct 2005
Location: NC
Posts: 822
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FDNewbie
It's not a circle. It's tons of turns. I don't think Nascar allows FD's on the track...
I gotta agree with Ramy on this one over mr. 495 for reps, ha