Hit the strip Friday w/mixed results
 

Mods listed below, 10# primary, 13# secondary, 30 psi of pressure in 245/45 Potenza S02pp's on stock rims.

60ft--------2.997
1/8 ET------9.6
1/8mph----88.6
1/4 ET-----14.03
1/4 mph---112.xx

This run was with no launch b/c I'm afraid of blowing up my rear diff. Also, my synchros in 2nd, 3rd and 4th are all grinding so I can't powershift. Also, my Tanabe suspension was way too stiff; next time I'm going to soften it.

Well, what do you guys think? W/a good launch and strong tranny, am I looking at mid 12's here?

P.S. My buddy said I was shooting flames going down the track :D

which tanabe coilover setup did you get my friend has the sustec pro. he likes it alot.

hoo-ah just look at that trap speed!
indicates big HP to me.
drivetrain needs attention.
good luck from a card carrying member of the (I broke a) halfshaft club!

ps. no fair not posting reaction time :P

You should be able to hit low 12s! I trapped a 13.0@111.1mph with just intake, full exhaust, and PFC w/ base maps and 14psi. That was in 90F So. Cal heat. I used Nitto 555Rs.

Slaps some drag radials on and go weeeee all the way down the track.

I ran a 12.1 @ 112mph..... so your right there. I also had a 1.69 60' on drag radials so that helped too. Also, if your shooting flames the whole way down the track, your running too rich. You ought to dyno tune your Power Fc when you get the chance. Dave programs it very rich to be safe.
Ernie

2.997 60' !!! I don't think I've ever seen that before :crying:

give me a break man, I was like 14 yrs old back when I ran that time :fawk:

:rlaugh: :rlaugh:

holy old thread LUPE, what prompted you to dig this one up?

talk abotu bringing a thread back from the dead...sheesh eric:)

Don't you agree that we need a drag forum to put all these threads in? I do!

I love how half the 3rd gen specific threads on the first page are related to drag racing at the moment...lol

Thanks for bumping all the old drag threads to make it look like we need a drag section. lol

BTW I wouldn't mind a drag section, just could have done without this little 'display'. :)

well it's good to know that I can beat my brother off the line but thats about it (me V6mr2 him rx7)

^No not really. I could probably get a better 60ft. In my 2wd Non-Hemi Dodge Ram!!!

You guys already have one! It's called the Mustang forum... ;)

I do post on www.corral.net and http://www.turbomustangs.com/ but it's just not the same :tank:

That's not our problem, is it? :p: Don't mind me...I just frown on FD's being used at the drag strip. Rubs me the wrong way. Waste of an incredible hardcore performance machine, not a drag box on wheels ;)

Don't mind me......... I frown on anyone who enjoys driving in circles all day long. That nonsense gives me diarhea, literally.

It's not a circle. It's tons of turns. I don't think Nascar allows FD's on the track... ;)

Same thing........ all that turning gives me the squirts.

Hahaha...that's hilarious. Breaking 1001 parts not engineered to take the *severe* damage of just trying to come off the line makes my stomach flip...

Seriously LUPE, I read that post right after you drug it up this afternoon and all I could think was :weed: - what got into him??

I didn't want to be the first to say something.

By the way Michael Savage is great - he's completely psychotic.

I gotta agree with Ramy on this one over mr. 495 for reps, ha

lol...Rich tends to get a little defensive at times