Rotary Drag Racing The place to post your racing stories and info

20bpp capella maiden run (australia)

Thread Tools
 
Search this Thread
 
Old 07-13-08, 06:55 AM
  #1  
Full Member
Thread Starter
 
dave20bpp's Avatar
 
Join Date: Dec 2006
Location: brisbane, Australia
Posts: 120
Likes: 0
Received 1 Like on 1 Post
20bpp capella maiden run (australia)

hey guys well last night my very long winded project made it to the track for the first time and all i can say is i cant be happier the thing launched straight and ran straight which is all i can ask for. It went 12.5 off the trailer and the last run went 12.3 at 110mph some things i did learn is that i need a shift light cause i kept short shifting 1-2 and i need diff gears cause i am just shifting 4 like 30 metres before the line, which is no good. Oh and i need a line lock kit i stalled it in the water twice it just has to much rear brake. but the good thing i think it is good for an mid 2 high 11 as it sits with a bit more practice, which isnt bad on MT et streets and pump fuel.


http://www.youtube.com/watch?v=FjlUmcbAUBo

enjoy i know i did


dave
Old 07-13-08, 07:12 AM
  #2  
rx7drifter

 
darkblaze's Avatar
 
Join Date: Dec 2005
Location: mesa az
Posts: 206
Likes: 0
Received 0 Likes on 0 Posts
wow thats a nice car
Old 07-13-08, 09:23 AM
  #3  
HAHA V8

iTrader: (9)
 
PDViper77's Avatar
 
Join Date: Jul 2004
Location: West Palm Beach - FL
Posts: 2,953
Likes: 0
Received 1 Like on 1 Post
Nice man
Old 07-13-08, 11:23 AM
  #4  
DPG Burnout

iTrader: (53)
 
rotorholic's Avatar
 
Join Date: Jul 2005
Location: DALLAS TX
Posts: 2,384
Likes: 0
Received 7 Likes on 7 Posts
sounds good
Old 07-13-08, 12:24 PM
  #5  
shut up you jack wagon

 
datsun1200's Avatar
 
Join Date: Nov 2007
Location: Crystal MN
Posts: 876
Received 2 Likes on 2 Posts
Nice work on the car,but what diff are you useing?
Old 07-13-08, 02:29 PM
  #6  
Eats, Sleeps, Dreams Rotary

iTrader: (1)
 
ultimatejay's Avatar
 
Join Date: Nov 2006
Location: California
Posts: 4,148
Likes: 0
Received 2 Likes on 2 Posts
Sounds awesome! Go the 4 doors! Man, I was going to paint my car a very similar color. If you're using the stock rearend- toss it. I broke two axles already with mine with street tires. Congrats on the run. It's rare to see a project started and finished, yet alone taking it the track from these forums. I have watched your project for awhile, very nice job. Keep us posted on future runs. I forgot- what tranny are you using?
Old 07-13-08, 05:03 PM
  #7  
Full Member
Thread Starter
 
dave20bpp's Avatar
 
Join Date: Dec 2006
Location: brisbane, Australia
Posts: 120
Likes: 0
Received 1 Like on 1 Post
Originally Posted by ultimatejay
Sounds awesome! Go the 4 doors! Man, I was going to paint my car a very similar color. If you're using the stock rearend- toss it. I broke two axles already with mine with street tires. Congrats on the run. It's rare to see a project started and finished, yet alone taking it the track from these forums. I have watched your project for awhile, very nice job. Keep us posted on future runs. I forgot- what tranny are you using?

thanks mate the diff is a hilux with a 4.3 centre i originally build the car to drive on the street but a 9 inch with 5.1 or something around there are in order, and the gearbox is a supra 5speed good for about 500hp normally but when that goes liberty time.


dave
Old 07-13-08, 06:25 PM
  #8  
Eats, Sleeps, Dreams Rotary

iTrader: (1)
 
ultimatejay's Avatar
 
Join Date: Nov 2006
Location: California
Posts: 4,148
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by dave20bpp
thanks mate the diff is a hilux with a 4.3 centre i originally build the car to drive on the street but a 9 inch with 5.1 or something around there are in order, and the gearbox is a supra 5speed good for about 500hp normally but when that goes liberty time.


dave
Right on. I am putting a 9" in mine as we speak. Were did you get the adaptor plate to run the Supra box? And did you have any mods done to the internals in the Supra box? Man you did some nice fast shifting in that run. It almost sounds like your running a clutchless box. Running N/A you definitely can use some lower gear ratio's in the rearend.
Old 07-13-08, 06:52 PM
  #9  
Registered User

iTrader: (4)
 
justturbo2's Avatar
 
Join Date: Jan 2005
Location: new york
Posts: 1,571
Received 0 Likes on 0 Posts
real nice.
Old 07-15-08, 04:51 PM
  #10  
Full Member
Thread Starter
 
dave20bpp's Avatar
 
Join Date: Dec 2006
Location: brisbane, Australia
Posts: 120
Likes: 0
Received 1 Like on 1 Post
Originally Posted by ultimatejay
Right on. I am putting a 9" in mine as we speak. Were did you get the adaptor plate to run the Supra box? And did you have any mods done to the internals in the Supra box? Man you did some nice fast shifting in that run. It almost sounds like your running a clutchless box. Running N/A you definitely can use some lower gear ratio's in the rearend.


hey mate no just a factory w58 5 speed supra with reline oil the adapter plate can be got from pacperformance here in australia very common conversion here in oz.


dave
Old 07-19-08, 10:33 PM
  #11  
pushing s##t up hill

 
beefcake's Avatar
 
Join Date: Jan 2008
Location: ya mums kitchen
Posts: 1,040
Received 0 Likes on 0 Posts
sweet sounds from your car, love the sound of n/a 20b engines
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
C. Ludwig
Single Turbo RX-7's
49
01-30-19 06:31 AM
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM
Queppa
Introduce yourself
4
09-08-15 08:13 PM
Junkee
New Member RX-7 Technical
2
08-15-15 01:57 PM



Quick Reply: 20bpp capella maiden run (australia)



All times are GMT -5. The time now is 08:13 AM.