2011 Offical Rotary Drag Racing Records
11-28-09, 05:45 PM
#176
When the list started with the fastest 20 there were a bunch of 11 sec cars. As you can see now, if you don't have a 9sec car or a very low 10 sec car you will get bumped by next year.
Even if we made it top 30 I doubt 11 sec cars would be there anymore. Did Speed_NYC ask you to post this
I got a few PMs to do fastest times on stock twins.
Even if we made it top 30 I doubt 11 sec cars would be there anymore. Did Speed_NYC ask you to post this
I got a few PMs to do fastest times on stock twins.
I want to be conferable with my car,track and combination's before i spend real $$$ and hang with the 10sec guys. There is a lot to learn so 12s is good for now
12-01-09, 08:13 PM
#179
Man i need to get with the program and get in the 9's. Gona try when i get AEM so i can tune on race gas and make more power. I doubt i can make the cut but heres my pass from Imports Vs Domestics.
R/T .084
60' 1.573
330 4.442
1/8 6.840
MPH 101.90
1000 8.879
1/4 10.636
MPH 128.13
93 Rx7 Full interior, A/c, P/s, 2890lbs with me
Street port built by PFS 475rwhp@17psi on 93 and meth
Apexi PFC
BW SC362
ET Streets Bias Ply 26x10.5x16
Stock Trans
Stock Rear
Stock Suspension(Eibach Springs)
R/T .084
60' 1.573
330 4.442
1/8 6.840
MPH 101.90
1000 8.879
1/4 10.636
MPH 128.13
93 Rx7 Full interior, A/c, P/s, 2890lbs with me
Street port built by PFS 475rwhp@17psi on 93 and meth
Apexi PFC
BW SC362
ET Streets Bias Ply 26x10.5x16
Stock Trans
Stock Rear
Stock Suspension(Eibach Springs)
12-07-09, 09:47 AM
#180
Senior Member
Join Date: Jun 2006
Location: miami fl
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
ok we ran in the NSCRA dec 6 event in the 4 CYL class with the white fc n pulled a 9.783 in the first pass n a 9.647E.T at 143.25 MPH in the second pass we run a stock tranny(mazda tranny) n stock rear
here is the breakdown
60'-1.357
330-4.025
1/8-6.220
MPH-114.42
1000-8.074
1/4-9.647
MPH-143.25
here is the breakdown
60'-1.357
330-4.025
1/8-6.220
MPH-114.42
1000-8.074
1/4-9.647
MPH-143.25
12-07-09, 11:07 AM
#181
ok we ran in the NSCRA dec 6 event in the 4 CYL class with the white fc n pulled a 9.783 in the first pass n a 9.647E.T at 143.25 MPH in the second pass we run a stock tranny(mazda tranny) n stock rear
here is the breakdown
60'-1.357
330-4.025
1/8-6.220
MPH-114.42
1000-8.074
1/4-9.647
MPH-143.25
here is the breakdown
60'-1.357
330-4.025
1/8-6.220
MPH-114.42
1000-8.074
1/4-9.647
MPH-143.25
.
12-08-09, 01:44 PM
#184
Stay tuned...
iTrader: (3)
Join Date: Jul 1997
Location: West Islip, Long Island NY
Posts: 2,917
Likes: 0
Received 1 Like
on
1 Post
Man i need to get with the program and get in the 9's. Gona try when i get AEM so i can tune on race gas and make more power. I doubt i can make the cut but heres my pass from Imports Vs Domestics.
R/T .084
60' 1.573
330 4.442
1/8 6.840
MPH 101.90
1000 8.879
1/4 10.636
MPH 128.13
93 Rx7 Full interior, A/c, P/s, 2890lbs with me
Street port built by PFS 475rwhp@17psi on 93 and meth
Apexi PFC
BW SC362
ET Streets Bias Ply 26x10.5x16
Stock Trans
Stock Rear
Stock Suspension(Eibach Springs)
R/T .084
60' 1.573
330 4.442
1/8 6.840
MPH 101.90
1000 8.879
1/4 10.636
MPH 128.13
93 Rx7 Full interior, A/c, P/s, 2890lbs with me
Street port built by PFS 475rwhp@17psi on 93 and meth
Apexi PFC
BW SC362
ET Streets Bias Ply 26x10.5x16
Stock Trans
Stock Rear
Stock Suspension(Eibach Springs)
12-08-09, 01:51 PM
#185
Stay tuned...
iTrader: (3)
Join Date: Jul 1997
Location: West Islip, Long Island NY
Posts: 2,917
Likes: 0
Received 1 Like
on
1 Post
ok we ran in the NSCRA dec 6 event in the 4 CYL class with the white fc n pulled a 9.783 in the first pass n a 9.647E.T at 143.25 MPH in the second pass we run a stock tranny(mazda tranny) n stock rear
here is the breakdown
60'-1.357
330-4.025
1/8-6.220
MPH-114.42
1000-8.074
1/4-9.647
MPH-143.25
here is the breakdown
60'-1.357
330-4.025
1/8-6.220
MPH-114.42
1000-8.074
1/4-9.647
MPH-143.25
Just let me know the fuel, turbo, motor, port, how much boost and I will finish.
12-23-09, 08:10 PM
#189
i know i did not break into the top 20 but would it count if the run was done on a mustang dyno?
http://videos.streetfire.net/video/12122009_725142.htm
driving was done by steve
http://videos.streetfire.net/video/12122009_725142.htm
driving was done by steve
12-23-09, 08:38 PM
#191
steve said that it has been his experiance that the numbers on the dyno are within a 10th of actual numbers. the dyno that we used is the exact dyno that he has in texas and he is quite familiar with it. i did not know this could be done on the dyno and it was the first time i have seen it....it was pretty cool
12-27-09, 12:01 PM
#192
Full Member
Join Date: Aug 2009
Location: Orlando, FL
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
stock chassis stock trans
demented performance
1985 mazda rx7
fuel q16
turbo 74mm gt42
tranny turbo 2 stock
computer microtech
engine cosmo semi bridge
year 2009
boost 34lbs
first pass we ran 9.54@149mph 30psi
60' 1.39
330' 4.07
660' 6.19
mph 114.4
1000' 8.02
1320' 9.54
mph 149.9
second pass we backed it up wit 9.40@142 34psi off the grove in 4th gear on off gas...
60' 1.40
330' 4.00
660' 6.06
mph 117.5
1000' 7.84
1320' 9.40
mph 142.3
http://72.167.101.30/asfalto/fotos/09-12-20s/00050.jpg
1985 mazda rx7
fuel q16
turbo 74mm gt42
tranny turbo 2 stock
computer microtech
engine cosmo semi bridge
year 2009
boost 34lbs
first pass we ran 9.54@149mph 30psi
60' 1.39
330' 4.07
660' 6.19
mph 114.4
1000' 8.02
1320' 9.54
mph 149.9
second pass we backed it up wit 9.40@142 34psi off the grove in 4th gear on off gas...
60' 1.40
330' 4.00
660' 6.06
mph 117.5
1000' 7.84
1320' 9.40
mph 142.3
http://72.167.101.30/asfalto/fotos/09-12-20s/00050.jpg
Last edited by dementegirl12a; 12-27-09 at 12:05 PM.
12-28-09, 09:38 PM
#194
Full Member
Join Date: Aug 2009
Location: Orlando, FL
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
thanks bro.... the car has a chevy 10 bolt the links are in the factory position n has aftermarket coilover in factory position as well... tubs are completely stock only runnin a 26x8.5 15 mickey thompson cause i cant go any bigger....
02-01-10, 12:39 PM
#199
Full Member
Join Date: Aug 2009
Location: Orlando, FL
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
02-14-10, 07:42 AM
#200
pushing s##t up hill
ok my entry is a 89 FC stock chassis, stock fc t2 rear end, stock t2 gearbox with syncro mods only, 13bt t2 half bridge motor ida efi with ta45 76/102 mm turbo on 20 psi boost, 26x8.5 slicks , motec computer and ignition, sunoco maxnos fuel, 420 or 450 @ 20psi on the dyno depending on what ramp rate or jack off your left nut rate you wish to use 
Car weighs also 2174 pounds too, my first time out too in building it over 4 years
react... .228
60' ... 1.439
330' ... 4.342
660' ... 6.662
660' ... speed 108.60 mph
1000' ... 8.635
1/4 ... 10.311
Terminal Speed ... 134.93 mph
PS i cant see a list anywhere, is it in the first post or am i missing something
excuse my ignorance
Car weighs also 2174 pounds too, my first time out too in building it over 4 years react... .228
60' ... 1.439
330' ... 4.342
660' ... 6.662
660' ... speed 108.60 mph
1000' ... 8.635
1/4 ... 10.311
Terminal Speed ... 134.93 mph
PS i cant see a list anywhere, is it in the first post or am i missing something
excuse my ignorance