Viton Oil O-rings
#1
Senior Member
Thread Starter
Viton Oil O-rings
Viton Oil O-ring information:
OK, all I have is a number of 158 for the inner, and 244 for the outter, and I had to specify Viton. I don't see a reason to post my price because it will be different from what anybody off the street would get.
Contact me at rx712psi@hotmail.com or PM if you're about to build a motor & are interested in trying a set of these. I could easily get a sample set...
OK, all I have is a number of 158 for the inner, and 244 for the outter, and I had to specify Viton. I don't see a reason to post my price because it will be different from what anybody off the street would get.
Contact me at rx712psi@hotmail.com or PM if you're about to build a motor & are interested in trying a set of these. I could easily get a sample set...
#4
Hey, where did my $$$ go?
Join Date: Feb 2001
Location: Bimingham, AL
Posts: 4,413
Likes: 0
Received 0 Likes
on
0 Posts
Well I am fixing to put my motor back together in a week or two, the only thing is I dont think I want to "guinee pig them". I'm putting to much into this motor and dont have time to pull it again if it doesnt work.
Rob at Pineapple uses Viton O-rings, are these the same as his?????
STEPHEN
Rob at Pineapple uses Viton O-rings, are these the same as his?????
STEPHEN
#6
Hey, where did my $$$ go?
Join Date: Feb 2001
Location: Bimingham, AL
Posts: 4,413
Likes: 0
Received 0 Likes
on
0 Posts
Hey man, I guess if you want to get me a set of samples I'll take a look at them but I dont promise to install them. I want to look at them and compare them to oem orings first. Make sure they are the EXACT same size in everyway to the Mazda oem orings.
STEPHEN
STEPHEN
#7
Senior Member
Thread Starter
Originally posted by SPOautos
Hey man, I guess if you want to get me a set of samples I'll take a look at them but I dont promise to install them. I want to look at them and compare them to oem orings first. Make sure they are the EXACT same size in everyway to the Mazda oem orings.
STEPHEN
Hey man, I guess if you want to get me a set of samples I'll take a look at them but I dont promise to install them. I want to look at them and compare them to oem orings first. Make sure they are the EXACT same size in everyway to the Mazda oem orings.
STEPHEN
Trending Topics
#8
Hey, where did my $$$ go?
Join Date: Feb 2001
Location: Bimingham, AL
Posts: 4,413
Likes: 0
Received 0 Likes
on
0 Posts
Well, I would only shelve them if i thought there would be a problem. You've never said they were the exact same size or even if they would work or not. Its not like I'm going to commit putting Orings in my motor that I dont even know will work. I was basically saying if I were to get them and they were not the exact size as oem I dont think I would want to use them. If they are the exact size and shape I'll use them.
STEPHEN
STEPHEN
Last edited by SPOautos; 08-21-02 at 09:33 AM.
#9
Hey, where did my $$$ go?
Join Date: Feb 2001
Location: Bimingham, AL
Posts: 4,413
Likes: 0
Received 0 Likes
on
0 Posts
Nevermind, I've decided I dont want to chance pulling my motor back out of my car, rebuilding it and then reinstalling the motor over a set of Orings.
Its just not worth it to me
STEPHEN
Its just not worth it to me
STEPHEN
Thread
Thread Starter
Forum
Replies
Last Post
troym55
3rd Generation Specific (1993-2002)
23
05-25-16 12:42 PM
tiger18
3rd Generation Specific (1993-2002)
9
09-03-15 08:27 PM