Time to bridgeport my 13B tomorrow.
#1
Full Member
Thread Starter
Join Date: Jan 2002
Location: Canada
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Time to bridgeport my 13B tomorrow.
I have a 13Bt with a blown water seal (I am pretty sure that is the problem) but good apex seals. I'm going to part the engine out in the near future.
Anyway, tomorrow I'm tearing it down, inspecting all the parts and measuring all the parts/surfaces for how much wear and if they are still within spec.
I've never done a bridgeport before so I'm going to give it a try tomorrow! I know just how to do it, and have the tools, jsut haven't done it before.
I don't have a template, but I know exactly where to place the port for how I want it. I don't care if I mess it up anyway...
Should be fun!
I'll see if I can get pics up within a week or so.
(I don't have a dig. camera OR a scanner!! )
Anyway, tomorrow I'm tearing it down, inspecting all the parts and measuring all the parts/surfaces for how much wear and if they are still within spec.
I've never done a bridgeport before so I'm going to give it a try tomorrow! I know just how to do it, and have the tools, jsut haven't done it before.
I don't have a template, but I know exactly where to place the port for how I want it. I don't care if I mess it up anyway...
Should be fun!
I'll see if I can get pics up within a week or so.
(I don't have a dig. camera OR a scanner!! )
#3
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,884
Received 2,635 Likes
on
1,865 Posts
there was a thread a couple of months ago that tells you how to figure out where the bridge goes
mike
mike
#4
Full Member
Thread Starter
Join Date: Jan 2002
Location: Canada
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
I woke up sick today
Had to miss work and am not going to start my engine till later this week I guess. Damn.
Anyway, I am not sure how much I would want, I don't really want to deal with anything about selling it for about a week or so. I will be sure to make a new post though when I do.
Had to miss work and am not going to start my engine till later this week I guess. Damn.
Anyway, I am not sure how much I would want, I don't really want to deal with anything about selling it for about a week or so. I will be sure to make a new post though when I do.
#7
Full Member
Thread Starter
Join Date: Jan 2002
Location: Canada
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Oh ****, I read the other post where you are looking for some. I thought you meant videos of someone porting an engine! doh!
Yeah, I have a bunch of rotary videos, (about 400) and some you would be interested in. I don't have anywhere to host them.
If you go on mIRC I can send them to you.
Yeah, I have a bunch of rotary videos, (about 400) and some you would be interested in. I don't have anywhere to host them.
If you go on mIRC I can send them to you.
Trending Topics
#9
Full Member
Thread Starter
Join Date: Jan 2002
Location: Canada
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, it's an irc (internet relay chat) program.
- Go to www.mirc.com and download it.
- Install it.
- Open up mIRC.
- Fill in the neccessary info (name, nickname, etc)
- connect to "Random Dalnet Server" which will probably already be selected, so click on "connect to server"
- after you connect, type this: /join #kraftdinner
- I will be there tonight from 12:45am-2:00am (it's 10:30pm right now)
If you have any problems just ask.
- Go to www.mirc.com and download it.
- Install it.
- Open up mIRC.
- Fill in the neccessary info (name, nickname, etc)
- connect to "Random Dalnet Server" which will probably already be selected, so click on "connect to server"
- after you connect, type this: /join #kraftdinner
- I will be there tonight from 12:45am-2:00am (it's 10:30pm right now)
If you have any problems just ask.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
ncds_fc
New Member RX-7 Technical
1
08-15-15 10:06 AM
KAL797
Test Area 51
0
08-11-15 03:47 PM