I won't need a window net.

 

Oh yeah?

"6:3
A ribbon-style or SFI Spec 27.1 mesh-type window net is madatory
on any car required by the rules to have a roll cage. Window net must be securely
mounted on the inside of the roll cage with permanent attachment at the
bottom. All attachment points must be designed in an attempt to protect
the driver and avoid contact with track surface or guardwall. Eyelet clips,
dog leash hardware, hose clamps, etc. prohibited. Penetration of
webbing, except as performed by manufacturer, prohibited. Any modification
to net must be performed by manufacturer."

 

No matter!

 

huh?

 

So, I wanna know did the manifold and turbo deliver as I promised? Is the response as good as you hoped for ie transient? Street driving etc?

 

Yes, all HAIL to Sean As for street driving I don't know cause it hasn't seen anything under 25psi yet! lol.....

 

HOLY SHITTT !!!! , VERY impressive numbers !!!! , I can only hope to make those numbers on my currant setup .

 

I was trapping 151mph with 650rwhp at the same weight. My 1/8 mph was 121mph also.

 

Yea, but you can drive! lol....

 

If you could yank the wheels like crispeed..............

 

LoL, I didn't mean it like that. I was curoius about how quickly it responds with the larger wheel, it looks like it's response is a bit off from the 94mm. I haven't had the chance to run the smaller and larger side by side. I thought you might have had a chance by now to answer my original question of X boost by what RPM.


-S-

 

Its going to Ray this week for the Kaaz, toe link, trailing arms, and tuning on pump gas at 15psi. Since the track is closed for the winter I can focus on drivability now and get my cage before spring hits.
And thanks Sean for sticking by your product. You've done good by me.