Non responsive boost sometimes
#1
I have more fun than you.
Thread Starter
Join Date: May 2002
Location: Sand Key/Clearwater Beach, Florida
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
Non responsive boost sometimes
Basically I notice often that if I am cruising (not in acceleration already) at like 3500-5000 rpms in 3rd or
4th gear and then go WOT, my boost climbs to 0-5 psi and rpms increase only. Little or no turbo response.
When I let off the accelerator I hear the "whooo" sound.
It doesn't do this all the time, but I notice it on the highway. It seems like my car needs to be running a bit
before it starts doing it but once it starts it does it
conistently every time.
I've taken it to 2 Rx-7 specialists and neither have been able to figure out the issue.
Any ideas?
David
4th gear and then go WOT, my boost climbs to 0-5 psi and rpms increase only. Little or no turbo response.
When I let off the accelerator I hear the "whooo" sound.
It doesn't do this all the time, but I notice it on the highway. It seems like my car needs to be running a bit
before it starts doing it but once it starts it does it
conistently every time.
I've taken it to 2 Rx-7 specialists and neither have been able to figure out the issue.
Any ideas?
David
#2
I have more fun than you.
Thread Starter
Join Date: May 2002
Location: Sand Key/Clearwater Beach, Florida
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
A few mod notes would help...
Power FC
Profec B
Stock turbos
Pettit IC "3"
I had this problem when my Profec B was not working
and had to control with the PFC. The 2nd guy I took
it too said he removed the PowerFC from the boost
control loop and set up the Profec B not as standard but as he would set up an Apexi controller....for what its worth.
Anyways I still have this issue.
Power FC
Profec B
Stock turbos
Pettit IC "3"
I had this problem when my Profec B was not working
and had to control with the PFC. The 2nd guy I took
it too said he removed the PowerFC from the boost
control loop and set up the Profec B not as standard but as he would set up an Apexi controller....for what its worth.
Anyways I still have this issue.
#5
Chimera Driver
Join Date: Jul 2001
Location: Birmingham, AL
Posts: 1,334
Likes: 0
Received 0 Likes
on
0 Posts
If you're still running the seq sysytem sound slike your've got a hose blown off. I'd check all the hoses related to the CRV. You might find on that's not connected.
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
alexdimen
3rd Generation Specific (1993-2002)
20
10-23-15 01:50 PM