fstrnyou

I've looked for and found the pressure thingy part of the wastegate and can only see about 2 inches of the hose coming out of it. where does it go EXACTLY and can i get to any of it to plumb in a manual boost controller (LOWES not homedepot). do i have to take the air pump off to get to it? i just need to get to it so i can plumb in a tee for a bleeder valve. a little later i'll be installing a ball and spring in conjunction with the bleeder. ya, i know all about the FCD too-blah blah.

oh.. 88 TII all stock 15.285 in 1/4

need to go faster!!

craig

Scott 89t2

take off the intake pipe into the turbo and it's a peice of cake.

if you don't have any other mods I probably wouldn't put it in... get a down pipe and intake. taht'll bump you up a couple psi and take lots of stress off the engine and turbo.

fstrnyou

ya, those mods are soon coming. the thing is...my parents bought it for me and i am paying them back. until it's all paid for, i'm not allowed to do anything. i figured the MBC can be easily hidden. intake would be obvious to look at, and exhaust would be louder. I don't want to get caught. Also, fuel injectors will also be done the same time i do exhaust and intake. maybe 850 sec. and leave the stock pri. for now. and go with 720 pri. later. porting is a long ways away. ANYWAYS..

it seems almost impossible to do anything with all that smog stuff in the way. i've only had it 2 months and haven't had time to fiddle.

Craig