Interested in info on intake design for project
#1
Junior Member
Thread Starter
Join Date: Nov 2002
Location: TN
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Interested in info on intake design for project
Can anyone point me toward any reading like tech articles, etc. on tuning intake length for power band etc. It's for a project I'm trying to build myself.
Thanks,
Milan
Thanks,
Milan
#2
Rotors still spinning
iTrader: (1)
I did build my own manifold. I had a couple threads on that a while back. You'll have to scroll down for some good info but its there. There is some flaming every once in a while on there too but thats to be expected.
https://www.rx7club.com/forum/showth...threadid=94362
https://www.rx7club.com/forum/showth...hreadid=113249
There are several books with info that do pertain to what you want to know but many times you'll be more confused than you were before you opened the book. Check through the car section at Barnes and Noble or Borders books. Look into books that deal with carbs, fuel injection and forced induction. They all usually have useful info on the subject somewhere in them.
https://www.rx7club.com/forum/showth...threadid=94362
https://www.rx7club.com/forum/showth...hreadid=113249
There are several books with info that do pertain to what you want to know but many times you'll be more confused than you were before you opened the book. Check through the car section at Barnes and Noble or Borders books. Look into books that deal with carbs, fuel injection and forced induction. They all usually have useful info on the subject somewhere in them.
Last edited by rotarygod; 01-26-03 at 03:34 AM.
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
3
08-20-15 10:24 PM
rx8volks
Canadian Forum
0
08-13-15 04:55 AM
rx8volks
Canadian Forum
0
08-11-15 10:30 PM