the fastest rx-7
#6
FOR SALE
Join Date: Jun 2002
Location: Central Florida
Posts: 738
Likes: 0
Received 0 Likes
on
0 Posts
Mines prolly well into the 4's in the 1/4 now because i swapped a stock civic motor in it and finnaly found that 6" inch exhaust tip. I also made my intake out of PVC and have it sucking hot air from the exhaust housing because EVERYONE knows that hot air is thinner than cold air so it breathes easier.
Trending Topics
#9
Rotary Freak
Join Date: May 2002
Location: Houston
Posts: 1,742
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ijneb
Mines prolly well into the 4's in the 1/4 now because i swapped a stock civic motor in it and finnaly found that 6" inch exhaust tip. I also made my intake out of PVC and have it sucking hot air from the exhaust housing because EVERYONE knows that hot air is thinner than cold air so it breathes easier.
Mines prolly well into the 4's in the 1/4 now because i swapped a stock civic motor in it and finnaly found that 6" inch exhaust tip. I also made my intake out of PVC and have it sucking hot air from the exhaust housing because EVERYONE knows that hot air is thinner than cold air so it breathes easier.
#14
10.32 @ 133
Join Date: Mar 2001
Location: Sydney, Australia
Posts: 1,362
Likes: 0
Received 0 Likes
on
0 Posts
A777 has run 9.99 @ 136 in his first gen
I ran 10.32 in my 1st gen
Soul Assasin ran 9.8 in his 2nd gen
AnthonyRodrigues ran 8.18 in his 3/4 chassis 3rd gen about 3 years ago
Dont know about any of the US/PR guys being on here though....
I ran 10.32 in my 1st gen
Soul Assasin ran 9.8 in his 2nd gen
AnthonyRodrigues ran 8.18 in his 3/4 chassis 3rd gen about 3 years ago
Dont know about any of the US/PR guys being on here though....
#16
10.32 @ 133
Join Date: Mar 2001
Location: Sydney, Australia
Posts: 1,362
Likes: 0
Received 0 Likes
on
0 Posts
#21
Rotary Freak
Join Date: Jun 2003
Location: Metro Detroit
Posts: 1,709
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ijneb
Mines prolly well into the 4's in the 1/4 now because i swapped a stock civic motor in it and finnaly found that 6" inch exhaust tip. I also made my intake out of PVC and have it sucking hot air from the exhaust housing because EVERYONE knows that hot air is thinner than cold air so it breathes easier.
Mines prolly well into the 4's in the 1/4 now because i swapped a stock civic motor in it and finnaly found that 6" inch exhaust tip. I also made my intake out of PVC and have it sucking hot air from the exhaust housing because EVERYONE knows that hot air is thinner than cold air so it breathes easier.
#22
Full Member
Join Date: Jul 2004
Location: New Orleans, LA
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ijneb
Mines prolly well into the 4's in the 1/4 now because i swapped a stock civic motor in it and finnaly found that 6" inch exhaust tip. I also made my intake out of PVC and have it sucking hot air from the exhaust housing because EVERYONE knows that hot air is thinner than cold air so it breathes easier.
Mines prolly well into the 4's in the 1/4 now because i swapped a stock civic motor in it and finnaly found that 6" inch exhaust tip. I also made my intake out of PVC and have it sucking hot air from the exhaust housing because EVERYONE knows that hot air is thinner than cold air so it breathes easier.
#23
Super Snuggles
Originally posted by 4RotorRocket
#24
Rotary Freak
iTrader: (10)
Cris "Speed" Anderson in FL has a 2nd gen with 13B-REW single turbo motor, Jericho 5speed I believe, Mopar 8 3/4" rear end and has gone 9.20's@150mph with 26x10.5" slick and turbo only was the story. Suppossedly weighed 2600lbs approx.
I haven't heard about the car in years.... wonder if it is still around or if he has gone faster. The car could technically be a street car.
I'd say he is one of the fastest on here.... excluding tube frame 20B monsters.
-GNX7
I haven't heard about the car in years.... wonder if it is still around or if he has gone faster. The car could technically be a street car.
I'd say he is one of the fastest on here.... excluding tube frame 20B monsters.
-GNX7