Wing or diffuser?
#1
Full Member
Thread Starter
Join Date: Feb 2002
Location: Wellington - NZ
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Wing or diffuser?
Hi guys
I'm trying to work out what's the next step in aero development for the race car, which is going to have the biggest impact - make the car faster!
I've got a splitter and flat under tray (back to the sway bar) at the front, matching side skirts, although nothing flat extending into the middle of the car from the bottom of the skirt...
It seems like the next step is either a GT style wing or a diffuser.
What do you think?
Thanks
Shaun
I'm trying to work out what's the next step in aero development for the race car, which is going to have the biggest impact - make the car faster!
I've got a splitter and flat under tray (back to the sway bar) at the front, matching side skirts, although nothing flat extending into the middle of the car from the bottom of the skirt...
It seems like the next step is either a GT style wing or a diffuser.
What do you think?
Thanks
Shaun
#3
Eats, Sleeps, Dreams Rotary
Wing first. It's adjustable, LOWERS weight, and won't get damaged in an off-track excursion.
Some canards on the front, if they're legal in your class. Don't know just how much they help, but what the heck... couldn't hurt.
Some canards on the front, if they're legal in your class. Don't know just how much they help, but what the heck... couldn't hurt.
#7
Banned. I got OWNED!!!
iTrader: (1)
Join Date: Jun 2006
Location: Denver
Posts: 697
Likes: 0
Received 0 Likes
on
0 Posts
Ok, so let me help you here-
First, by the time you add the hardware etc to mount a wing, you have likely not saved any weight. Even if you in fact did save weight, there is drag to consider, and you have to balance the reward/penalty of the drag vs downforce.
You can just bolt a wing on and go for a drive and maybe its better maybe its not, but it is far easier to screw up wing settings than get them right. FAR EASIER.
A wing does not in and of itself help you with putting power down on corner exit. It will(properly setup) enable you to have a higher cornering speed which leads to higher exit speed which in turn lowers laptimes. Higher exit speeds usually also helps with power delivery, but this is a long conversation.
Generically wings on club cars are grossly misused and definitely not understood. You will gain far more laptime through good instruction, a well adjusted and tuned suspension, and seat time than you will by throwing on an aero device.
First, by the time you add the hardware etc to mount a wing, you have likely not saved any weight. Even if you in fact did save weight, there is drag to consider, and you have to balance the reward/penalty of the drag vs downforce.
You can just bolt a wing on and go for a drive and maybe its better maybe its not, but it is far easier to screw up wing settings than get them right. FAR EASIER.
A wing does not in and of itself help you with putting power down on corner exit. It will(properly setup) enable you to have a higher cornering speed which leads to higher exit speed which in turn lowers laptimes. Higher exit speeds usually also helps with power delivery, but this is a long conversation.
Generically wings on club cars are grossly misused and definitely not understood. You will gain far more laptime through good instruction, a well adjusted and tuned suspension, and seat time than you will by throwing on an aero device.
Trending Topics
#8
Senior Member
Join Date: Jul 2003
Location: San Jose
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Stock R1 wing only weighs like 4 lbs since it is basically just a big piece of foam. As D Walker said, pretty much any aftermarket wing (good or bad) will add weight. From a bang for buck perspective, and given that you do not have complete underbody, my guess is the downforce from a wing will far outweigh what you'd get from a diffuser. I think there is alot more engineering that needs to go into a diffuser and it will be more dependent on the other parts it needs to work right.
-Andy
-Andy
#9
GET OFF MY LAWN
iTrader: (1)
Experience with a FD GT car. A wing added to the rear of the car within the rules was able to generate so much downforce it mde the car undrivable. Couldn't get the front to stick any where near as much as the rear even with the splitter.
Running without the wing tufts of yarn on the back window stand straight up in the air= lift and drag from air not staying attached to the body.
Running the wing at a neutral angle of attack it made the yarn lay down smooth and helped both top end and cornering.
My vote. Wing. Diffuser is very hard to make work as an add on to car without much overhang behind the wheels. They are also very touchy to ride height
Running without the wing tufts of yarn on the back window stand straight up in the air= lift and drag from air not staying attached to the body.
Running the wing at a neutral angle of attack it made the yarn lay down smooth and helped both top end and cornering.
My vote. Wing. Diffuser is very hard to make work as an add on to car without much overhang behind the wheels. They are also very touchy to ride height
#10
Rotary Freak
Just to add my $.02. First if you are going to add a wing to your car, you have to consider the effectiveness of the airfoil design versus the normal speeds you travel on your track. If your max speed, cornering speed, is under 100 mph/ 160 kmh, then no wing is really going to make a substantial difference when you compare it to the costs in added drag. If you are grossly overpowered, then you can set your wing damn near straight up and down, add a ton of drag and get some downforce in the rear. Just like sticking a sheet of plywood up in the air. Look at World of Outlaw sprint cars. Their wings are so inefficient, but they work as the cars have huge power and really don't go super fast. Most tracks in New Zealand have relatively slower corners as far as I know. I race at Mosport most of the time and aero does have an effect on most cars lap times.
Personally, I would take the rear wing off your car as I don't think it does a thing and its got to weigh a lot. Try a race or 2 like this and see if the reduced drag makes you go any faster in a straight line. Take the money that you were going to spend on a wing and put the stickiest tires you can get on the car and use that for improved mechanical grip which helps in cornering, braking and accelerating. Play with the rear toe and bar settings to dial out any corner entry transient oversteering spookiness and you will go way faster.
If you have your heart set on a wing, don't buy any over the counter Japanese tuner wing, get a WC or Grand Am Crawford Composite wing and mount it high enough in the airstream so it isn't shadowed by the greenhouse. They really work well on a variety of cars and have a huge bling factor. I an certain that a few guys in Kiwi land have started making clones. I know of a Cobra R runner down there with some good stuff that they have made in-country.
If you are going to add it, make sure it will do something or admit to yourself that you are adding it to look cool and try to minimize the impact on your cars performance.
Eric
Personally, I would take the rear wing off your car as I don't think it does a thing and its got to weigh a lot. Try a race or 2 like this and see if the reduced drag makes you go any faster in a straight line. Take the money that you were going to spend on a wing and put the stickiest tires you can get on the car and use that for improved mechanical grip which helps in cornering, braking and accelerating. Play with the rear toe and bar settings to dial out any corner entry transient oversteering spookiness and you will go way faster.
If you have your heart set on a wing, don't buy any over the counter Japanese tuner wing, get a WC or Grand Am Crawford Composite wing and mount it high enough in the airstream so it isn't shadowed by the greenhouse. They really work well on a variety of cars and have a huge bling factor. I an certain that a few guys in Kiwi land have started making clones. I know of a Cobra R runner down there with some good stuff that they have made in-country.
If you are going to add it, make sure it will do something or admit to yourself that you are adding it to look cool and try to minimize the impact on your cars performance.
Eric
#12
Rotary Freak
iTrader: (3)
diffusers also dont work nearly as well if the bottom of the car isnt flat leading up to it.
i also vote wing, but go with a proper low drag wing (not that APR bullshit...). kognition is a high DF wing which comes with a drag penalty. rear wing should only be used to balance the car, so theres realyl no need for an extreme wing unless your front end makes really good downforce. if you can find one, a NASCAR COT wing is actually a great profile for low drag/downforce. same as crawford, grandam, etc, except they're like $600 used.
i also vote wing, but go with a proper low drag wing (not that APR bullshit...). kognition is a high DF wing which comes with a drag penalty. rear wing should only be used to balance the car, so theres realyl no need for an extreme wing unless your front end makes really good downforce. if you can find one, a NASCAR COT wing is actually a great profile for low drag/downforce. same as crawford, grandam, etc, except they're like $600 used.
#13
Full Member
Thread Starter
Join Date: Feb 2002
Location: Wellington - NZ
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
The car is stripped of anything non-essential, has an extensive chrome moly cage in it and weighs in at 2425 lbs (incl 1/2 tank of gas, but no driver).
I'm running stock twins (non-seq) with a mild extend port done on the motor ... upgraded radiator, IC, oil coolers, fuel pumps and 4 850cc injectors.
I'll move to a single turbo next year (I'm watching Howard Coleman's thread with interest), but thought I might do the next bit of aero work in the meantime.
#14
Full Member
Thread Starter
Join Date: Feb 2002
Location: Wellington - NZ
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Agree completely, I'm currently focussing on alignment, suspension set-up and seat time, along with many hours watching footage taken from inside the car to review where I can improve ... there's not a lot of instruction options near where I live ...
#15
Full Member
Thread Starter
Join Date: Feb 2002
Location: Wellington - NZ
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Experience with a FD GT car. A wing added to the rear of the car within the rules was able to generate so much downforce it mde the car undrivable. Couldn't get the front to stick any where near as much as the rear even with the splitter.
Running without the wing tufts of yarn on the back window stand straight up in the air= lift and drag from air not staying attached to the body.
Running the wing at a neutral angle of attack it made the yarn lay down smooth and helped both top end and cornering.
Running without the wing tufts of yarn on the back window stand straight up in the air= lift and drag from air not staying attached to the body.
Running the wing at a neutral angle of attack it made the yarn lay down smooth and helped both top end and cornering.
How did you record what was happening? Mount a Go-Pro facing backwards on the roof filming the rear windscreen?
#16
Rotary Freak
iTrader: (7)
Autospeed Magazine LINK has done a lot of nice DIY aero testing, some of it even involving FDs. Using vortex generators, they were able to smooth out the airflow over the stock wing more effectively for relatively cheap. Might be a good first step before making a big purchase like a high end wing. Do some digging and search around their site for "aero" and "vortex"
Thread
Thread Starter
Forum
Replies
Last Post
rx7jocke
Suspension/Wheels/Tires/Brakes
72
06-17-16 03:48 AM