Race Car Tech Discuss anything related to road racing and auto X.

SCCA EP 2nd Gen RX7 for sale

Thread Tools
 
Search this Thread
 
Old May 14, 2007 | 08:36 PM
  #1  
thetech's Avatar
Thread Starter
****** of disaster
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 1,115
Likes: 0
From: Santa Monica, CA
SCCA EP 2nd Gen RX7 for sale

As some of you know I bought this car from John Weisberg about 18 months ago and spent money and time restoring it to its former running state. This car was the runner-up in the 2004 Runoffs.

Nearly every part on the car is 1 race and 2 test-days old. I have all receipts and well over $25k into the car. I recently blew the engine at Buttonwillow during testing, not entirely sure of the cause yet. My next step was to have Mazdatrix rebuild, but I will keep the car if I go down that path. It's sitting as it was running, just needs the engine rebuilt. Car was recently wired with a redundant-relay Painless wiring harness, and I just bought the Setrab 60-row oil cooler about 2 hours before the engine blew Engine made just over 208rwhp (chassis dyno with stock timing) and the car was finally getting set-up to the point of being extremely fast. I'm sure with some more tweaking and a new engine (and an appropriate driver!) this will be an extremely competitive car.


My work schedule is becoming too hectic to spend the time I need on the car and racing which forces sale. I'm asking $15k as it sits with all the spare stuff (theres a whole bunch of gasket sets, calipers, spare trans, springs, fuel pumps, etc etc).




More pictures here, and available on request.

Body/Suspension:

AWR Fiberglass fenders front and rear
BERG Racing front splitter (carbon) + spare
Factory aluminum hood
Gutted doors, hood, etc
Full production-legal cage
Lexan windshield
Painless wiring 8 circuit harness
Longacre Carbon Fiber switch-panel
Lonagcre Kill-switch
ATL 15 gallon fuel cell
Delrin/aluminum bushings throughout
JIC FLT-A2 Shocks
Multiple spare springs
Adjustable rear camberlinks
RacingBeat 5/8" Rear Swaybar + adjustable endlinks
Speedway adjustable Front Swaybar + adjustable endlinks
Tilton pedals w/triple master cylinders
Rebuilt front/rear calipers
New Hawk Blue pads front & rear
New factory brake rotors
New steel braided brake lines
Tilton balance bar + adjuster
8 Diamond 15" racing wheels + Hoosier slicks
8 spare used Hoosier 23x9.5-15 R45A and R55 slicks
Fresh Viper GTS Blue paint

Engine:

Currently blown '90 motor, built by Tony Rivera, damage unknown
Factory FI manifold
Megasquirt v3 ECU + Innovate Wideband o2
Setrab 60 row oil-cooler, -10 braided hose
Griffin 3 core crossflow/dualpass radiator
ACT 4 puck clutch
Fidanza aluminum flywheel
New counterweight, bearings, rear main seal, slave cylinder, trans xmember, race trans mounts
Miata short shifter
Walbro 255lph fuel pump
Aeromotive FPR
Racing beat roadrace header
Racing beat megaphone/collector
Borla XR1 muffler
Spare stock trans

Interior

Cobra Suzuka seat + mounts
Autometer gauges throughout
Autometer tach + shift light
Momo steering wheel + quick release
Simpson platinum 6-point camlock harness
Schroth window net
AMB Display-IT lap timer
ESS 2.3l fire system

Last edited by thetech; May 14, 2007 at 08:43 PM.
Reply
Old May 15, 2007 | 10:16 AM
  #2  
2a+RoN's Avatar
Rotary Freak
Tenured Member 15 Years
 
Joined: Dec 2001
Posts: 2,402
Likes: 0
From: chandler, AZ
good looking car. good luck with the sale.
Reply
Old Jun 13, 2007 | 06:14 PM
  #3  
kendark2light's Avatar
Full Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Mar 2007
Posts: 146
Likes: 1
From: howell, michigan
wow my dream car good luck with the sale should be worth buying
Reply
Old Jun 16, 2007 | 11:28 PM
  #4  
initial D is REAL!'s Avatar
Rotary Enthusiast
 
Joined: Mar 2007
Posts: 1,485
Likes: 0
From: Pasadena
Im curious what kind of port job this engine had to hit 208whp?
Reply
Old Jun 17, 2007 | 09:31 AM
  #5  
Turbo23's Avatar
Panda Bear
Tenured Member: 20 Years
iTrader: (4)
 
Joined: Nov 2001
Posts: 1,732
Likes: 4
From: Lititz, PA
I remember when john was racing it. Beautiful machine, good luck with the sale!
Reply
Old Jun 17, 2007 | 02:29 PM
  #6  
kendark2light's Avatar
Full Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Mar 2007
Posts: 146
Likes: 1
From: howell, michigan
what class are/were you runing in?
Reply
Old Jun 17, 2007 | 03:43 PM
  #7  
jgrewe's Avatar
GET OFF MY LAWN
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2005
Posts: 2,837
Likes: 2
From: Fla.
That would be an E Production class car in SCCA.
Reply
Old Jun 17, 2007 | 10:53 PM
  #8  
thetech's Avatar
Thread Starter
****** of disaster
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 1,115
Likes: 0
From: Santa Monica, CA
Just saw that people were still posting here!

Car is no longer for sale and is in the process of becoming a 20B powered Super Unlimited car. Progress is in the blog in my sig!

Thanks for all the comments.
Reply
Old Jun 17, 2007 | 11:16 PM
  #9  
initial D is REAL!'s Avatar
Rotary Enthusiast
 
Joined: Mar 2007
Posts: 1,485
Likes: 0
From: Pasadena
oh man, i hope I see it at the tracks. Where is the car going? Ask him if I can hump it a few times when hes done doing the 20b swap
Reply
Old Jun 17, 2007 | 11:19 PM
  #10  
thetech's Avatar
Thread Starter
****** of disaster
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 1,115
Likes: 0
From: Santa Monica, CA
I'm actually doing the swap myself
Reply
Old Jun 18, 2007 | 12:40 AM
  #11  
initial D is REAL!'s Avatar
Rotary Enthusiast
 
Joined: Mar 2007
Posts: 1,485
Likes: 0
From: Pasadena
2nd dibs then
Reply
Old Jun 30, 2007 | 03:14 PM
  #12  
theflatlander's Avatar
Dual Wielding DieGrinders
Tenured Member: 20 Years
iTrader: (3)
 
Joined: Aug 2002
Posts: 720
Likes: 2
From: Elko, NV
now if only i had an extra $15k.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Marty RE
Introduce yourself
3
Aug 29, 2015 07:51 AM
craaaazzy
Comments and Suggestions Archive
3
Aug 21, 2015 02:00 PM
Marty RE
New Member RX-7 Technical
0
Aug 17, 2015 09:36 AM
Marty RE
New Member RX-7 Technical
0
Aug 13, 2015 11:19 AM




All times are GMT -5. The time now is 04:57 PM.