Post pics of your racecar!
#126
Lives on the Forum
Road America Turn 7 Badger Bimmers OctoberFast 2002
My Red FD3S. It's a daily driver and weekend track warrior (open track and drivers eds) This pic was taken by Edmund Lacis @ Road America Turn 7, OctoberFAST 2002. Here's Edmund Lacis' website if interested in using Edmund for photo shoots @ Road America http://www.photobyedmund.com/
Last edited by SleepR1; 02-02-04 at 09:25 AM.
#127
Lives on the Forum
Re: Road America Turn 7 Badger Bimmers OctoberFast 2002
Forgot to attach the image
Originally posted by SleepR1
My Red FD3S. It's a daily driver and weekend track warrior (open track and drivers eds) This pic was taken by Edmund Lacis @ Road America Turn 7, OctoberFAST 2002. Here's Edmund Lacis' website if interested in using Edmund for photo shoots @ Road America http://www.photobyedmund.com/
My Red FD3S. It's a daily driver and weekend track warrior (open track and drivers eds) This pic was taken by Edmund Lacis @ Road America Turn 7, OctoberFAST 2002. Here's Edmund Lacis' website if interested in using Edmund for photo shoots @ Road America http://www.photobyedmund.com/
Last edited by SleepR1; 02-02-04 at 09:37 AM.
#129
Here are some pictures of our race car you can see them in the gallery section of our site after many long years we finally have the car going!
3 rotor Pictures make sure to click on the "Gallery" link
Gabe
3 rotor Pictures make sure to click on the "Gallery" link
Gabe
#131
Junior Member
Join Date: Feb 2004
Location: SoCal
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
My 1st gen racer
Check out my website for tons of pix, etc. and a blow-by-blow of building my '83 into a SCCA PRO7 race car. You'll dig it.
www.reenmachine.com/pro7
www.reenmachine.com/pro7
#132
#133
brap brap
Originally Posted by RacerNo39
Here's some pics of our race car.
C:\Documents and Settings\Robert\My Documents\My Pictures
C:\Documents and Settings\Robert\My Documents\My Pictures
#134
brap brap
Here's my soon-to-be autox only car, once I get the money to rebuild her:
More pictures can be found and in/around here:
http://zukin.f0e.net/GXL/
http://zukin.f0e.net/
More pictures can be found and in/around here:
http://zukin.f0e.net/GXL/
http://zukin.f0e.net/
#137
Mr Sparkles
iTrader: (12)
By the rules, you can't do anything to control boost. The car is setup with the turbo system 100% stock including the pills, running a stock ECU.
Now I know most reading this will say BS, he has to be cheating. There are only two main problems you have to over come in ASP trim. When you open the intake and exhaust, boost will increase. As a result you have the potential of hitting Fuel cut and running lean. We all know that the rotary hates a lean condition and most blown motors are caused by it. The good thing about Autocross is that it is mostly run in first and second gear. Because of this hitting boost cut is not a real problem. I only have an issue when it is fairly cold out. I solve part of this using the RX7's natural ability to cook the engine bay just idling . What I do on cold days is leave the car running between runs so that everything gets heat soaked. So on cold days, my intercooler is acting more as a heater than a cooler.
We all know that if you raise boost, you have to provide more fuel for safe rotary operation. There are 2 ways you can do this and stay legal in ASP. All aftermarket ECU's that I have investigated are illegal in ASP as they ether remove fuel cut as it relates to boost, or move the point at which it comes into play. So what you are left with is to install a piggyback fuel/ignition controller that allows the stock ecu to continue to control boost and boost cut, or find another way to deliver more full. An external fuel/ignition computer would be the best choice, but I choose a different path.
What I did was have my primary and secondary injectors enlarged by RC engineer and added a RRFPR. The stock computer maps are set to deliver a set amount of fuel at any given boost/temp/gear/rpm based on set injector size and fuel pressure. By enlarging my injectors I have increase the amount of fuel delivered at all points in this curve. By adding a RRFPR I can then increase the amount of fuel delivered as RPM and Boost increase. Because I only have to worry about first and second gear it works pretty well. If I had to drive long runs in 3rd gear or above I don't think you could tune enough with this setup to be safe. Only real side effect is I run extremely eye burning rich at idle . If I had to do it again, I would go with the first option . A little known tech tip is that if you have a boost-spiking problem at transition you can adjust the crossover actuator arm to smooth out these spikes.
When I go to track I just throw in my PFC and have "forgot" to take it out at a few local autocrosses .
Now I know most reading this will say BS, he has to be cheating. There are only two main problems you have to over come in ASP trim. When you open the intake and exhaust, boost will increase. As a result you have the potential of hitting Fuel cut and running lean. We all know that the rotary hates a lean condition and most blown motors are caused by it. The good thing about Autocross is that it is mostly run in first and second gear. Because of this hitting boost cut is not a real problem. I only have an issue when it is fairly cold out. I solve part of this using the RX7's natural ability to cook the engine bay just idling . What I do on cold days is leave the car running between runs so that everything gets heat soaked. So on cold days, my intercooler is acting more as a heater than a cooler.
We all know that if you raise boost, you have to provide more fuel for safe rotary operation. There are 2 ways you can do this and stay legal in ASP. All aftermarket ECU's that I have investigated are illegal in ASP as they ether remove fuel cut as it relates to boost, or move the point at which it comes into play. So what you are left with is to install a piggyback fuel/ignition controller that allows the stock ecu to continue to control boost and boost cut, or find another way to deliver more full. An external fuel/ignition computer would be the best choice, but I choose a different path.
What I did was have my primary and secondary injectors enlarged by RC engineer and added a RRFPR. The stock computer maps are set to deliver a set amount of fuel at any given boost/temp/gear/rpm based on set injector size and fuel pressure. By enlarging my injectors I have increase the amount of fuel delivered at all points in this curve. By adding a RRFPR I can then increase the amount of fuel delivered as RPM and Boost increase. Because I only have to worry about first and second gear it works pretty well. If I had to drive long runs in 3rd gear or above I don't think you could tune enough with this setup to be safe. Only real side effect is I run extremely eye burning rich at idle . If I had to do it again, I would go with the first option . A little known tech tip is that if you have a boost-spiking problem at transition you can adjust the crossover actuator arm to smooth out these spikes.
When I go to track I just throw in my PFC and have "forgot" to take it out at a few local autocrosses .
#143
Full Member
Join Date: Sep 2001
Location: Los Angeles
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Pro7
My PRO7 at California Speedway (Blue/Yellow #21):
Hey, that car looks familiar! Maybe this season i'll actually get to see it in action.. haha
Thread
Thread Starter
Forum
Replies
Last Post