Pipe Transition

Reply Subscribe

Thread Tools

Search this Thread

Dec 31, 2008 | 01:29 PM

HDP

Thread Starter

A Fistfull of Dollars!

iTrader: (2)

Joined: Nov 2002

Posts: 5,322

Likes: 6

From: HuntsVEGAS, AL

Pipe Transition

What is the easiest way to make a transition from 3/4" pipe to 1" pipe? TIA.

Dec 31, 2008 | 01:53 PM

jgrewe

GET OFF MY LAWN

iTrader: (1)

Joined: Feb 2005

Posts: 2,837

Likes: 2

From: Fla.

It depends what is going through it or if its supposed to be structural?

Dec 31, 2008 | 01:53 PM

gkmccready

Senior Member

Joined: Oct 2006

Posts: 321

Likes: 1

From: SFBay

Buy a reducer?

http://www1.mscdirect.com/CGI/NNSRIT...MT4NO=55837196

Do you really mean pipe?

Dec 31, 2008 | 02:15 PM

HDP

Thread Starter

A Fistfull of Dollars!

iTrader: (2)

Joined: Nov 2002

Posts: 5,322

Likes: 6

From: HuntsVEGAS, AL

Quote:

Originally Posted by jgrewe

It depends what is going through it or if its supposed to be structural?

Not structural, joining 3/4" BOV tube to flange with 1" tube.

Dec 31, 2008 | 02:16 PM

HDP

Thread Starter

A Fistfull of Dollars!

iTrader: (2)

Joined: Nov 2002

Posts: 5,322

Likes: 6

From: HuntsVEGAS, AL

Quote:

Originally Posted by gkmccready

Buy a reducer?

http://www1.mscdirect.com/CGI/NNSRIT...MT4NO=55837196

Do you really mean pipe?

Pipe/tube... not threaded, weld on type.

Dec 31, 2008 | 02:36 PM

gkmccready

Senior Member

Joined: Oct 2006

Posts: 321

Likes: 1

From: SFBay

Can you join it at 90deg? Just take a piece of 3/4in tube and shape it to fit the 1in. Join it like rollbar tubing joints. Or if you don't need a smooth reducer and it's at the termination of the 1in tube, weld a cap on, cut a 3/4in hole, weld the 3/4in tube on.