RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- Race Car Tech (https://www.rx7club.com/race-car-tech-103/)

- - Pipe Transition (https://www.rx7club.com/race-car-tech-103/pipe-transition-809986/)

HDP	12-31-08 01:29 PM

Pipe Transition

What is the easiest way to make a transition from 3/4" pipe to 1" pipe? TIA.

jgrewe

12-31-08 01:53 PM

It depends what is going through it or if its supposed to be structural?

gkmccready

12-31-08 01:53 PM

Buy a reducer?

http://www1.mscdirect.com/CGI/NNSRIT...MT4NO=55837196

Do you really mean pipe?

HDP	12-31-08 02:15 PM

Quote:

Originally Posted by jgrewe (Post 8838193)

It depends what is going through it or if its supposed to be structural?

Not structural, joining 3/4" BOV tube to flange with 1" tube.

HDP	12-31-08 02:16 PM

Quote:

Originally Posted by gkmccready (Post 8838197)

Buy a reducer?

http://www1.mscdirect.com/CGI/NNSRIT...MT4NO=55837196

Do you really mean pipe?

Pipe/tube... not threaded, weld on type.

gkmccready

12-31-08 02:36 PM

Can you join it at 90deg? Just take a piece of 3/4in tube and shape it to fit the 1in. Join it like rollbar tubing joints. Or if you don't need a smooth reducer and it's at the termination of the 1in tube, weld a cap on, cut a 3/4in hole, weld the 3/4in tube on.

HDP	12-31-08 06:23 PM

Thanks, I'll give it a try.

All times are GMT -5. The time now is 09:15 PM.