New Jerico transmission rebuild advice
#1
RE for life
Thread Starter
New Jerico transmission rebuild advice
I am in the market for 4 speed jerico. and i just bought a used one on line
and seller claim is been rebuild and store as spare
and he sent me few pic of mt
here is two of them. you can see there is slighly chip on dog gear ? is this normal ?
i understand when you change gear in dog box it will wear out the dog ring
but i dont know how bad is need to be rebuild ?
is this one the case need to change ?
thanks for your time
J
and seller claim is been rebuild and store as spare
and he sent me few pic of mt
here is two of them. you can see there is slighly chip on dog gear ? is this normal ?
i understand when you change gear in dog box it will wear out the dog ring
but i dont know how bad is need to be rebuild ?
is this one the case need to change ?
thanks for your time
J
#2
Senior Member
iTrader: (6)
J -
I don't see chips on the dog gear but rather the face plate. I don't think those small chips will cause any issue with the performance of the transmission. Here is a link regarding shifting advice from Hewland.
FWIW, I installed a similar dog box last year and very much enjoy the reliability versus the OEM FD 5-speed.
Guy
I don't see chips on the dog gear but rather the face plate. I don't think those small chips will cause any issue with the performance of the transmission. Here is a link regarding shifting advice from Hewland.
FWIW, I installed a similar dog box last year and very much enjoy the reliability versus the OEM FD 5-speed.
Guy
#3
RE for life
Thread Starter
J -
I don't see chips on the dog gear but rather the face plate. I don't think those small chips will cause any issue with the performance of the transmission. Here is a link regarding shifting advice from Hewland.
FWIW, I installed a similar dog box last year and very much enjoy the reliability versus the OEM FD 5-speed.
Guy
I don't see chips on the dog gear but rather the face plate. I don't think those small chips will cause any issue with the performance of the transmission. Here is a link regarding shifting advice from Hewland.
FWIW, I installed a similar dog box last year and very much enjoy the reliability versus the OEM FD 5-speed.
Guy
Thanks for reply. I am same like you. tired of braking OEM transmission
I think I will install a ignition cut off switch on shifter so i can no lift up shift and still protect
transmission
#5
brappppp brappppp
iTrader: (4)
Join Date: Oct 2009
Location: everwet washington
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
the pictures show a very nice transmission. the edge of the dogs do not look bad at all, this is normal wear and should not be any problem. wish i had pictures of the race trans I had, them dogs look nice. mine were beat off in the corners and it still worked good, high rev pull hard and still made the gear. That trans was in a 65 nova alki car making 500hp it never broke or missed a shift............just sayin
#6
RE for life
Thread Starter
Just call sevens only
Their package won't work for this jerico
Their kit is for reversion 4 but mine is old style
Reversion 2 ( I thought all jerico are the same)
And they told me to get crysler input shaft if
Plan to use their kit ? The reason is chey not long
Enought
Any one have better solution I can find
Their package won't work for this jerico
Their kit is for reversion 4 but mine is old style
Reversion 2 ( I thought all jerico are the same)
And they told me to get crysler input shaft if
Plan to use their kit ? The reason is chey not long
Enought
Any one have better solution I can find
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
risingsunroof82
1st Generation Specific (1979-1985)
8
09-07-15 01:11 PM