New Jerico transmission rebuild advice
2 Attachment(s)
I am in the market for 4 speed jerico. and i just bought a used one on line
and seller claim is been rebuild and store as spare and he sent me few pic of mt here is two of them. you can see there is slighly chip on dog gear ? is this normal ? i understand when you change gear in dog box it will wear out the dog ring but i dont know how bad is need to be rebuild ? is this one the case need to change ? thanks for your time J |
J -
I don't see chips on the dog gear but rather the face plate. I don't think those small chips will cause any issue with the performance of the transmission. Here is a link regarding shifting advice from Hewland. FWIW, I installed a similar dog box last year and very much enjoy the reliability versus the OEM FD 5-speed.:icon_tup: Guy |
Originally Posted by finger lock
(Post 11132673)
J -
I don't see chips on the dog gear but rather the face plate. I don't think those small chips will cause any issue with the performance of the transmission. Here is a link regarding shifting advice from Hewland. FWIW, I installed a similar dog box last year and very much enjoy the reliability versus the OEM FD 5-speed.:icon_tup: Guy Thanks for reply. I am same like you. tired of braking OEM transmission I think I will install a ignition cut off switch on shifter so i can no lift up shift and still protect transmission |
That looks clean to me from what I can see in the pics. What model is that trans?
|
the pictures show a very nice transmission. the edge of the dogs do not look bad at all, this is normal wear and should not be any problem. wish i had pictures of the race trans I had, them dogs look nice. mine were beat off in the corners and it still worked good, high rev pull hard and still made the gear. That trans was in a 65 nova alki car making 500hp it never broke or missed a shift............just sayin
|
Just call sevens only
Their package won't work for this jerico Their kit is for reversion 4 but mine is old style Reversion 2 ( I thought all jerico are the same) And they told me to get crysler input shaft if Plan to use their kit ? The reason is chey not long Enought Any one have better solution I can find |
ill like to find a use jerryco tranny for my 85 RX7 4 SPEED
|
2 Attachment(s)
Almost finish my hybird jerico
Decide to mate the none turbo front half to jerico by CNC the facing of Jerico should be firing up the car this weekend !! |
All times are GMT -5. The time now is 09:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands