Lightweight Stock Siize Brake Rotors
#1
Lightweight Stock Siize Brake Rotors
This could have gone into the Wheel /Tire/Brake section, but the autocrossers seem to hang out here and will better understand my inquiry.
SCCA Street Prepared rules let you reduce weight in your brake system by using rotors with aluminum hats, but not of smaller than stock rotor diameter. For a dedicated autocross car, the extra weight of a big brake kit is a disadvantage and is not needed as the typical autocross run only has about 15 seconds of hard braking.
So can anyone direct me to a stock size lightwieght rotor?
Thanks, Philip
SCCA Street Prepared rules let you reduce weight in your brake system by using rotors with aluminum hats, but not of smaller than stock rotor diameter. For a dedicated autocross car, the extra weight of a big brake kit is a disadvantage and is not needed as the typical autocross run only has about 15 seconds of hard braking.
So can anyone direct me to a stock size lightwieght rotor?
Thanks, Philip
Trending Topics
#9
Thanks guys for the continuing commentary. I checked RB's site first based on the BB threads and didn't go any further with them when it didn't show anything in the stock size.
If Andy got them there at one time, maybe they still have the capability to make a set.
Philip
If Andy got them there at one time, maybe they still have the capability to make a set.
Philip
#10
Senior Member
Join Date: Jul 2003
Location: San Jose
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Well, mine have been fine but I know some other folks had some issues with them failing/cracking. It may be they pulled the application for that or low demand. I've been pretty happy with them, though. Work fine and seem to be fairly resistant to the high wear I typically get with lots of cold/lower temp stops in autox use.
-Andy M.
-Andy M.
Thread
Thread Starter
Forum
Replies
Last Post
josef 91 vert
2nd Generation Specific (1986-1992)
23
09-03-15 11:20 AM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM