Race Car Tech Discuss anything related to road racing and auto X.

FS-FD CCW 17" 3 pc. aluminum wheels and Hoosiers

Thread Tools
 
Search this Thread
 
Old Dec 4, 2002 | 12:50 PM
  #1  
bradrx7's Avatar
Thread Starter
Full Member
Tenured Member 20 Years
 
Joined: Aug 2002
Posts: 248
Likes: 0
From: on track
FS-FD CCW 17" 3 pc. aluminum wheels and Hoosiers

For sale.... for track....
4 CCW 17" 3 piece aluminum wheels
Front 17x10.5 wide
Rear 17x11" wide
These wheels have the correct offset to FIT when used with tubular rear control arms. They are very light, hub centric and need NO spacers of any kind. Currently they have some fresh 275/40x17 Hoosier road race slicks mounted and balanced. One tire is bad as I cut down a tire at the last event. I have a source to buy a cheap replacement for the buyer. The wheels are not pristine as they were used for the track. A little elbow grease and some Mother's polish will make them sparkle.
$900.00 cash money plus shipping takes them
Reply
Old Dec 4, 2002 | 01:29 PM
  #2  
Silkworm's Avatar
Has been.. hangin' around
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 2,618
Likes: 0
From: Milpitas, CA
Wow, wish I had an FD, that's a great price! My 17x9.5 CCWs for the Trans Am ran me that much, but they were very ugly and no tires. They polished up very nicely, these are great wheels..

PaulC
Reply
Old Dec 4, 2002 | 01:57 PM
  #3  
fret's Avatar
Junior Member
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 22
Likes: 0
From: Arcadia, CA, USA
Arggg!!!!!!

Brad.... how could you??? If you remember I had emailed you a few weeks back asking about your rims after seeing your 7 for sale, and after you've turned down my offer to buy the rims, I just went and bought new ones from CCW, which just arrived yesterday.
Oh well... good luck.
Reply
Old Dec 4, 2002 | 02:02 PM
  #4  
CrispyRX7's Avatar
Polishing Fiend
Tenured Member: 20 Years
Liked
Loved
iTrader: (139)
 
Joined: Apr 2001
Posts: 3,391
Likes: 48
From: MD
Brad,
Where are you located and why are you selling???
Regards,
Crispy
Reply
Old Dec 4, 2002 | 03:06 PM
  #5  
EricM's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 411
Likes: 0
Finally.. race wheels for sale.

I'm very interested.. pm me or email at erichotml@hotmail.com
Thanks,
Reply
Old Dec 4, 2002 | 03:18 PM
  #6  
bradrx7's Avatar
Thread Starter
Full Member
Tenured Member 20 Years
 
Joined: Aug 2002
Posts: 248
Likes: 0
From: on track
fret,
I am sorry about that. I was waiting for some used slicks to appear. Took forever but they finally did. I hadn't saved any e-mails regarding the car (which is still for sale, btw)

Eric,
Crispy got them first.

Thanks everyone.
Reply
Old Dec 5, 2002 | 01:45 AM
  #7  
voodooracing's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Oct 2001
Posts: 319
Likes: 0
From: CA
I am interested in the CCW wheels... bradrx7 please pm me if they are still available....
Reply
Old Dec 6, 2002 | 02:37 PM
  #8  
rceron's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Apr 2001
Posts: 421
Likes: 0
From: Connecticut
Brad,

Hope I'm not too late. Please PM if others fall through or some bidding begins.
Reply
Old Dec 6, 2002 | 05:50 PM
  #9  
SleepR1's Avatar
Lives on the Forum
Tenured Member 10 Years
 
Joined: Sep 2001
Posts: 6,131
Likes: 2
From: IN
brad will these work with stock OE diameter coil springs, and stock body work?

Last edited by SleepR1; Dec 6, 2002 at 05:57 PM.
Reply
Old Dec 6, 2002 | 08:05 PM
  #10  
bradrx7's Avatar
Thread Starter
Full Member
Tenured Member 20 Years
 
Joined: Aug 2002
Posts: 248
Likes: 0
From: on track
Manny,

No, they need 2.5" springs. Bodywork isn't an issue if you don't count front inner liners which get trashed pretty good. Damn things are in the way anyway. <g>

BTW, the wheels are sold.
Reply
Old Dec 7, 2002 | 09:25 AM
  #11  
SleepR1's Avatar
Lives on the Forum
Tenured Member 10 Years
 
Joined: Sep 2001
Posts: 6,131
Likes: 2
From: IN
I figured as much...well I hope the new owner likes them! After seeing your pics of Le Circuit Mont Tremblant, I know I have to do a school there Happy holidays, and good luck with your new race track

Originally posted by bradrx7
Manny,

No, they need 2.5" springs. Bodywork isn't an issue if you don't count front inner liners which get trashed pretty good. Damn things are in the way anyway

BTW, the wheels are sold.
Reply
Old Dec 11, 2002 | 12:33 AM
  #12  
racedriver's Avatar
Full Member
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 243
Likes: 0
From: Nanaimo, BC , Canada
brad

what were the offsets for these wheels. I plan on getting a set. Should your buyer fall through I will send a cheque asap.

wouter
bouman@direct.ca
Reply
Old Dec 11, 2002 | 02:11 AM
  #13  
1FooknTiteFD's Avatar
Ghost Ride the Whip
Tenured Member 20 Years
 
Joined: Mar 2001
Posts: 1,467
Likes: 1
From: Foster City, CA
post pics please! what are the condition of the wheels? any scratches?
Reply
Old Dec 11, 2002 | 07:17 AM
  #14  
bradrx7's Avatar
Thread Starter
Full Member
Tenured Member 20 Years
 
Joined: Aug 2002
Posts: 248
Likes: 0
From: on track
They are shipped. Sale over, man.

As for offsets, I cannot remember but John Purner at CCW would know. 50mm is in my brain, but don't count on it.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BNR34RB26DETT
Build Threads
42
Feb 28, 2018 11:27 AM
A_Shadow
Comments and Suggestions Archive
0
Sep 1, 2015 06:31 AM




All times are GMT -5. The time now is 07:09 PM.