RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Race Car Tech (https://www.rx7club.com/race-car-tech-103/)
-   -   FS-FD CCW 17" 3 pc. aluminum wheels and Hoosiers (https://www.rx7club.com/race-car-tech-103/fs-fd-ccw-17-3-pc-aluminum-wheels-hoosiers-138121/)

bradrx7 12-04-02 12:50 PM

FS-FD CCW 17" 3 pc. aluminum wheels and Hoosiers
 
For sale.... for track....
4 CCW 17" 3 piece aluminum wheels
Front 17x10.5 wide
Rear 17x11" wide
These wheels have the correct offset to FIT when used with tubular rear control arms. They are very light, hub centric and need NO spacers of any kind. Currently they have some fresh 275/40x17 Hoosier road race slicks mounted and balanced. One tire is bad as I cut down a tire at the last event. I have a source to buy a cheap replacement for the buyer. The wheels are not pristine as they were used for the track. A little elbow grease and some Mother's polish will make them sparkle.
$900.00 cash money plus shipping takes them

Silkworm 12-04-02 01:29 PM

Wow, wish I had an FD, that's a great price! My 17x9.5 CCWs for the Trans Am ran me that much, but they were very ugly and no tires. They polished up very nicely, these are great wheels..

PaulC

fret 12-04-02 01:57 PM

Arggg!!!!!!
 
Brad.... how could you??? If you remember I had emailed you a few weeks back asking about your rims after seeing your 7 for sale, and after you've turned down my offer to buy the rims, I just went and bought new ones from CCW, which just arrived yesterday.
Oh well... good luck.

CrispyRX7 12-04-02 02:02 PM

Brad,
Where are you located and why are you selling???
Regards,
Crispy

EricM 12-04-02 03:06 PM

Finally.. race wheels for sale.

I'm very interested.. pm me or email at erichotml@hotmail.com
Thanks,

bradrx7 12-04-02 03:18 PM

fret,
I am sorry about that. I was waiting for some used slicks to appear. Took forever but they finally did. I hadn't saved any e-mails regarding the car (which is still for sale, btw)

Eric,
Crispy got them first.

Thanks everyone.

voodooracing 12-05-02 01:45 AM

I am interested in the CCW wheels... bradrx7 please pm me if they are still available....

rceron 12-06-02 02:37 PM

Brad,

Hope I'm not too late. Please PM if others fall through or some bidding begins.

SleepR1 12-06-02 05:50 PM

brad will these work with stock OE diameter coil springs, and stock body work?

bradrx7 12-06-02 08:05 PM

Manny,

No, they need 2.5" springs. Bodywork isn't an issue if you don't count front inner liners which get trashed pretty good. Damn things are in the way anyway. <g>

BTW, the wheels are sold.

SleepR1 12-07-02 09:25 AM

I figured as much...well I hope the new owner likes them! After seeing your pics of Le Circuit Mont Tremblant, I know I have to do a school there :) Happy holidays, and good luck with your new race track:)


Originally posted by bradrx7
Manny,

No, they need 2.5" springs. Bodywork isn't an issue if you don't count front inner liners which get trashed pretty good. Damn things are in the way anyway :)

BTW, the wheels are sold.


racedriver 12-11-02 12:33 AM

brad

what were the offsets for these wheels. I plan on getting a set. Should your buyer fall through I will send a cheque asap.

wouter
bouman@direct.ca

1FooknTiteFD 12-11-02 02:11 AM

post pics please! what are the condition of the wheels? any scratches?

bradrx7 12-11-02 07:17 AM

They are shipped. Sale over, man.

As for offsets, I cannot remember but John Purner at CCW would know. 50mm is in my brain, but don't count on it.


All times are GMT -5. The time now is 02:42 AM.


© 2024 MH Sub I, LLC dba Internet Brands