Anyone ever use KC raceware brakes
#3
Racing artist
Thread Starter
Join Date: Jul 2010
Location: Twain Harte California
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Thanks I was trying to contact him to buy his brake set up. I had e mailed him and called on the phone but had not been able to get in touch with him. But yesterday I got in contact with him. I will be getting his brake set up soon.
#5
Racing artist
Thread Starter
Join Date: Jul 2010
Location: Twain Harte California
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
I talked to Charlie and I will be ordering the front brake system from him. I will be running my car at Thunderhill raceway in California. they will be opening the new west Thunderhill part of the track and that will change the track from 3.1 mile roadcourse to a 5 mile track. That new brake will come in handy with some very high speed straightaways. `
#6
here we go again
iTrader: (3)
Just finished my brake set up. I got some 7s only take offs. But I didn't want to go to 15" rims. So working with the guys at 7s Only I made a bracket so I could use the bigger Outlaw calipers. (7s Only has a EP set up for 13" rims using the stock GSL-SE calipers)'
The 10" rotor on the top and the 12" rotor on the bottom. The nice thing about this set up, is the Struts use bigger bearings and double adjustable strut inserts. But you can get these hubs with the smaller 84-85 size bearings too.
The 10" rotor on the top and the 12" rotor on the bottom. The nice thing about this set up, is the Struts use bigger bearings and double adjustable strut inserts. But you can get these hubs with the smaller 84-85 size bearings too.
#7
Junior Member
Join Date: May 2013
Location: Noblesville, Indiana
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, sorry to nose in on a brake thread, but do you guys know the best way to get rear camber in a first gen? How about additional front camber? Anybody ever heard of transplanting a Miata rear suspension into a first gen? Thanks a lot!!
Trending Topics
#8
here we go again
iTrader: (3)
As for camber in the rear. call around and then take it to a race shop that will do it for you. Bending axles is an art. As for the Miata rear, a LOT of work and to many points. May as well do a 3 link and panard bar.
Thread
Thread Starter
Forum
Replies
Last Post
Tem120
3rd Generation Specific (1993-2002)
4
09-07-15 09:53 AM