26b in fb?!
#1
Senior Member
Thread Starter
Join Date: Nov 2002
Location: NEW ZEALAND.
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
26b in fb?!
Does anyone have any links to anyone who has done, or failed, to do this extreme mod!!!
Just that it's a fantacy of mine to see or get it done.
Just that it's a fantacy of mine to see or get it done.
#3
Junior Member
Join Date: May 2003
Location: Mason, Ohio
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
i have never seen one in FB no, i've seen the scoot 4rotor, and the 787b, those are the only 4rotors i have ever seen. Scoots was 4 12b housings, making it a 24a..., not a 26b
#5
Senior Member
Thread Starter
Join Date: Nov 2002
Location: NEW ZEALAND.
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
do u guys know the bmw with tyhe number plate BARB (or sumthing like that) it has a 4 rotor. It used to be a show car in australia, now it's a race weapon.
What would it take to get 1 into an fb.apart from a hell of a lot of $$$$.
What would it take to get 1 into an fb.apart from a hell of a lot of $$$$.
#6
Find Racing
Join Date: May 2001
Location: Seattle, WA
Posts: 1,219
Likes: 0
Received 0 Likes
on
0 Posts
Look for 20B swaps into FB's. Hell, even look at 13B-RE's into FB's. Read up on these logistical nightmares and hear about the problems encountered. Then multiply those complications by a factor equal to your age, cause the older you get, the less decades you have to get it done, and it'll take quite a while.
Redwood
"Telling it how it is since it was it"
Redwood
"Telling it how it is since it was it"
#7
SCCA Rookie
Join Date: May 2001
Location: Sterling Heights, MI
Posts: 1,936
Likes: 0
Received 0 Likes
on
0 Posts
well crap all it takes is muh-nay.. if it's a peripheral port (you can maybe make some spherical valves in the intake to make it run better at low RPM). Then with the peripheral port you can eliminate the width of the side housings (which used to flow air) and just run enough coolant through there to cool the engine.. I mean look how much spacing there is between cylinders on your typical piston motor.. it doesn't take too much coolant to do that.. and you can even have it braced in a few spots so it doesn't collapse.. that alone should be able to save a considerable amount of length of the motor.
Trending Topics
#9
Senior Member
Thread Starter
Join Date: Nov 2002
Location: NEW ZEALAND.
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
so in 15 years after $100, 000 I might b able to do it. I'll just get someone to build it for me. I heard somewhere that you can ask mazda to make one for you for the right $$$$ !!! fitting it in is the problem.
#10
Senior Member
Thread Starter
Join Date: Nov 2002
Location: NEW ZEALAND.
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
4-rotor BMW
Check this out!
https://www.rx7club.com/showthread.p...65#post2385365
I wonder how much it cost for this 4 rotor twin turbo setup!! I find it hard to imagine the power!
https://www.rx7club.com/showthread.p...65#post2385365
I wonder how much it cost for this 4 rotor twin turbo setup!! I find it hard to imagine the power!
#11
Junior Member
Join Date: May 2003
Location: Mason, Ohio
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Shamrock.James
Scoot's one aparently got scraped anyway... from what i heard it just kept ripping engine mounts.
Scoot's one aparently got scraped anyway... from what i heard it just kept ripping engine mounts.
#12
omgwtfposlol
Join Date: Dec 2002
Location: Orange City, FL
Posts: 862
Likes: 0
Received 0 Likes
on
0 Posts
your basically asking the equivelent of putting a v16 into a v8 chassis. yeh, it "can" be done. but it's a stupid waste of r&d that could have more simply sent you to the moon.
if you REALLY need more than say, 700hp, then put a 20b in. i know it's fun to think about a 4 rotor, but it's really just being stupid. damnit, your in NZ too, you could probably just go import a 99 spec or hell, a GT-R.
if you REALLY need more than say, 700hp, then put a 20b in. i know it's fun to think about a 4 rotor, but it's really just being stupid. damnit, your in NZ too, you could probably just go import a 99 spec or hell, a GT-R.
#14
Senior Member
Join Date: Mar 2001
Location: Raymond, ME / New Orleans, LA
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
waste of time, money and effort for no real gain over a 20b other than the neato factor, maybe better for lounge as I certainly wouldn't want to race one. imagine the logistics of trying to do quick repairs or getting parts.
#16
Airflow is my life
Originally posted by SERIES 1 XLR8
i have a long time 2 get it done.Hell i'm only 16
lol
i have a long time 2 get it done.Hell i'm only 16
lol
Thread
Thread Starter
Forum
Replies
Last Post