So I hooked up my MityVac and checked both vacuum and boost readings comparing the readings on the MityVac gauge, boost gauge, and FC Edit. Here is what I got. I can't make sense of the readings in FC Edit as they don't line up with any measurement I can figure out.

Unless the readings in FC Edit should have a decimal in front of them, then it would be fairly accurate.

 

PFC is in BAR, you are warm with the missing decimal.

 

So for the map reading, I could divide each boost reading by 100 and that should be my boost in bar. If that is the case, I am actually still pretty close comparing all my readings.