I just installed the 1600cc injectors and finished running the fuel pump and checking for leaks... all is well. Then after that i went to the sensor check screen to make sure that i had everything plugged in right again and the one marked fuel was highlighted. Is that the fuel temp sensor that is in the stock rail? Just wondering if not what else could it be?

 

I found this... But what does fuel output mean?

The first is, MONITOR. Once the engine is tuned correctly, your PowerFC Commander is used to MONITOR all of the data given to the ECU. It monitors air temperature, water temperature, Engine RPMs, fuel output, ignition timing, and boost pressure based off of the electrical signals outputted from each Sensor located in the engine bay. The Commander can give the information in numerical format (i.e. 724 RPMs, 82 deg C) and updates that for real time sensor data. As with most engine monitoring there are features that may appear frivolous, but a more thorough understanding of the engine will make any tuner appreciate them.

 

Bump for some help..

 

It is the voltage reading from the Fuel Temp sensor which you removed with the aftermarket fuel rail and 1600cc injectors. Change all the settings to 1.00 on "inj vs fuel temp" on settings 2 tab of the FC edit software.