Power FC PIM on powerf Fc @ 4.99 3bar

Reply Subscribe

Thread Tools

Search this Thread

Oct 17, 2012 | 09:22 AM

blkops

Thread Starter

Full Member

Joined: Nov 2010

Posts: 131

Likes: 0

From: Michigan

PIM on powerf Fc @ 4.99 3bar

Car won't start, like its out of gas or flooded, checked the sensors and the PIM is at 4.99 (when key is in accessory) starts for a second and shuts down.

Oct 17, 2012 | 09:23 AM

blkops

Thread Starter

Full Member

Joined: Nov 2010

Posts: 131

Likes: 0

From: Michigan

GM 3bar map

Oct 17, 2012 | 08:20 PM

arghx

rotorhead

iTrader: (3)

Joined: Aug 2004

Posts: 16,205

Likes: 461

From: cold

check the harness. it shouldn't read like that.

Oct 17, 2012 | 11:48 PM

dradon03

Derwin

iTrader: (2)

Joined: Apr 2005

Posts: 2,888

Likes: 0

From: MTL, QC

Quote:

Originally Posted by blkops

GM 3bar map

Did you change the settings when installing the 3bar or it was previously installed?

Oct 18, 2012 | 06:08 AM

Banzai-Racing

Rotary Specialists

iTrader: (11)

Joined: Jan 2008

Posts: 4,868

Likes: 344

From: Indiana

You not getting any signal. It is the same reading as when it is unplugged

Oct 18, 2012 | 11:32 PM

cewrx7r1

Eye In The Sky

iTrader: (2)

Joined: Feb 2001

Posts: 7,943

Likes: 133

From: In A Disfunctional World

Quote:

Originally Posted by Banzai-Racing

You not getting any signal. It is the same reading as when it is unplugged

Yep and it will cause extreme richness/flooding.

Oct 22, 2012 | 06:49 PM

KKMpunkrock2011

dorito powered

iTrader: (5)

Joined: Mar 2008

Posts: 2,839

Likes: 0

From: Lincoln, NE

wait PIM is at 4.99 or voltage is at 4.99V? Unplugged the GM 3 bar should give you 28k PIM, or at least mine does.

Power FC PIM on powerf Fc @ 4.99 3bar

Power FC PIM on powerf Fc @ 4.99 3bar

Trending Topics