Anyone aware of the approximate scaling for readings associated with the PFC Knock scale when in bar mode? In other words, is 1/4 bar displayed equivalent to 60? Half scale 120? Just curious. If this has been discussed in the past, please excuse my post and redirect me!

Thanks in advance!

 

I could try to feed the commander fake values to see how much, but I'm guessing a full bar is going to be around 250.

 

I have to retract my guess. I reviewed my code and found that knock can be higher than 250. So, this will require some testing.

 

Thanks for looking into this. I've just never seen the topic discussed and have always been curious. Appreciate the effort!

 

My bar max out at 100 in knock.
Have set the Knock warning to 150.
Dont really use the knock on my commander.
My car got from 70-150 in knock cruzing. :p

Under full boost it is max 10.

 

ok so i am new to power fc. so the readings come straight from the stock knock sensor right. now it a idle you will sense engine vibration especially with aftermarket motor mounts, so when under full boost what would a true knock reading look like with a slight ping?