Power FC Id 725 primary injector settings
07-11-18, 06:04 PM
#5
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,892
Likes: 0
Received 114 Likes
on
66 Posts
First you determine what your base fuel pressure will be.
Then you go to the ID site and download or view their setup tables for the injectors.
Then you use that data to set up all the Settings 5 injector fields which is a lot more than you showed.
No negative lag is needed as the inj setup will negate the need to do that.
You accel inj table is very rich and will be fouling your plugs most likely.
Do you have a DATALOGIT?
Then you go to the ID site and download or view their setup tables for the injectors.
Then you use that data to set up all the Settings 5 injector fields which is a lot more than you showed.
No negative lag is needed as the inj setup will negate the need to do that.
You accel inj table is very rich and will be fouling your plugs most likely.
Do you have a DATALOGIT?
Thread
Thread Starter
Forum
Replies
Last Post
FC3S_nataku
2nd Generation Specific (1986-1992)
8
12-10-13 08:54 AM
txfdr2
Single Turbo RX-7's
10
11-26-12 10:09 PM