Power FC FC Tune preview
#601
So...there is no version available yet right? Or would I need something special for the SR20det?
If there's a version available I'd like to get it. Please tell me how. Thanks.
If there's a version available I'd like to get it. Please tell me how. Thanks.
#603
Auto update should only be available if the calibration and the open file match by that I mean they are for the same powerFC. Autoupdate should be only be available when
1) The calibration has been read, but no file is open (I guess this would be a new unsaved file)
2) The calibration has been read, and the open file matches the same format as the calibration (same powerFC)
If a file has been opened but no calibration has been read, then disable the feature.
You're awesome!!
1) The calibration has been read, but no file is open (I guess this would be a new unsaved file)
2) The calibration has been read, and the open file matches the same format as the calibration (same powerFC)
If a file has been opened but no calibration has been read, then disable the feature.
You're awesome!!
#604
I'm not sure if you did this already with the +/- feature you added.
If you select a block of cells, could the +/- buttons change all the cells that are selected? That can come later if you didn't already do it.
Thanks!!!
If you select a block of cells, could the +/- buttons change all the cells that are selected? That can come later if you didn't already do it.
Thanks!!!
#605
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Germany
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Witness
If you select a block of cells, could the +/- buttons change all the cells that are selected? That can come later if you didn't already do it.
#606
Junior Member
Join Date: Jul 2006
Location: Dominican Republic
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
How about make a seting feature for the +/- like if you're going to increase 1 step on the fuel but if you want to increase 5 steps you don't have to hit the + 5 time and on the same seting window another for ign like make increments .25º or 1º etc.
Another cool feature will be if you could make a popup window when you hit ctrl a (Adjust) or other letter of your choice you will have 3 options for the selected values for fuel or ign.
1=Percentage adjustment (+ or - ) (______)
2=Add to selected values (+ or - ) (______)
3=Set selection to (______)
Another cool feature will be if you could make a popup window when you hit ctrl a (Adjust) or other letter of your choice you will have 3 options for the selected values for fuel or ign.
1=Percentage adjustment (+ or - ) (______)
2=Add to selected values (+ or - ) (______)
3=Set selection to (______)
#608
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Germany
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by peluca
How about make a seting feature for the +/- like if you're going to increase 1 step on the fuel but if you want to increase 5 steps you don't have to hit the + 5 time and on the same seting window another for ign like make increments .25º or 1º etc.
Another cool feature will be if you could make a popup window when you hit ctrl a (Adjust) or other letter of your choice you will have 3 options for the selected values for fuel or ign.
1=Percentage adjustment (+ or - ) (______)
2=Add to selected values (+ or - ) (______)
3=Set selection to (______)
Another cool feature will be if you could make a popup window when you hit ctrl a (Adjust) or other letter of your choice you will have 3 options for the selected values for fuel or ign.
1=Percentage adjustment (+ or - ) (______)
2=Add to selected values (+ or - ) (______)
3=Set selection to (______)
#610
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Germany
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fritts
When do you plan on having the Aux inputs working for logging?
The simplest solution would be a table were you can enter a polynomial up to the n-th order. Any other ideas?
#612
Mad Man
iTrader: (5)
I use an LC-1 which is a linear analog out that can be defined between 0-5 volts. I believe most WBO2's have linear outs now so I don't believe a polynomial or function generator is necessary. Chips are also available to Linearize EGT's. Not having analog outs availabe in Windows CE would kill the need for that version though. As the whole point of using a PDA is to have all of the functions viewable including WBO2. I guess to me one of the best features of datalogit is the ability to feed my WBO2 into it and be able to use it to tune. Especially with ~10 readings a second its much more accurate than reading a gauge and adjusting from that.
Last edited by fritts; 09-25-06 at 10:47 AM.
#613
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Germany
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Dr. IfTeR
I think Witness is right about the autoupdate feature.
#614
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Germany
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fritts
I believe most WBO2's have linear outs now so I don't believe a polynomial or function generator is necessary.
Also there are many other sensors, oil temp., exhaust temp., etc., so the analog inputs must be flexible.
It would be nice to get a few examples of the formulas / functions / polynomials.
#615
Mad Man
iTrader: (5)
I know that the new Techedge units, AEM, Innovate LC-1, Innovate LM-1, NGK, PLX Devices WBO2's all have linear outputs. Which is to me a full list of commonly used WBO2's
Here is a link though to the older Techedge unit's output voltages
http://techedge.com.au/vehicle/wbo2/wblambda.htm
I am not sure whether this is good for all the LSU2 sensors or not though.
Here is a link though to the older Techedge unit's output voltages
http://techedge.com.au/vehicle/wbo2/wblambda.htm
I am not sure whether this is good for all the LSU2 sensors or not though.
#616
for anyone who can help!!! i have the data logit but have not used it yet!! can i tune on fc tune with the box or do i have to use the datalogit software program??? any info will help!!
thanks p.s fast stay on top of you game plan, we are all counting on you!!![I][U][QUOTE]
thanks p.s fast stay on top of you game plan, we are all counting on you!!![I][U][QUOTE]
#617
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Germany
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
@jayjay22: FC Tune misses some features required for tuning like aux inputs, so I would recommend the FC Datalogit software. The software should be soon at a stage to replace the Datalogit software.
#625
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Germany
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by kevinvr6
so if fc tune is free, and i have datalogit box, then how will fasthatch make money off me ? :P
I should have a new version in a few days, will finish auto update for undo/redo today.