Not yet, I first wanted to add support for cars with a MAP sensor and than those with a MAF sensor. But please email me your maps.

 

PM sent.

 

UPdate your site, and could you post a link to the new version?

 

Andre, are you also working on FC Watch or is it something from Apexi?

I don't seem to be able to load a map into the latest FCTune. Could anyone post a map which can be loaded? Preferably for 13B Rew. If you do, please mention for what detup it was tuned.

I have PFC right now but no datalogit.

Many, MANY thanks,

Neal

 

Look 10 post up there is a link with a file that opens in FCTune.

 

I am developing FCWatch, which is a graphical, plug-in based application for real time dispay of data channels and high performance data logging for the Apexi PowerFC.

https://www.rx7club.com/power-fc-forum-47/new-software-power-fc-users-fcwatch-preview-533202/


FastHatch, nice job with FCTune so far, I must say.

 

I did but didn't work for me. There is a zip file on nopistons.com with about 8 or 10 different maps (from stock to T78) which open perfectly.

http://www.nopistons.com/forums/inde...65&hl=pfc+maps

Neal

 

Just registered there and downloaded the maps. I'll check them this evening.

 

Except the "dragon T70" and "T78" map you can open every other file with FC Tune.

 

The files have been corrupted by opening and saving them with a text editor. I see such files from time to time, so I may add support for them later today.

 

Andre,... you are the best :-)

 

I've uploaded a new version that supports all maps in the zip file.

http://www.fctune.com/download/development

 

YAY!

 

I have POWER-FC of version 1.93.
I want you to be able to connect this version.

I hope.

 

Nice job Fast!!

 

i was able to open a FD dat file but not my SR20. is that because the software only supports rx7's?

 

Looks amazing! By the way would fc pro cable really work with the program? If so can where can I even find one? I knwo they went through dealers and what not.

 

Fasthatch,

For those who has carputers in their cars would you be able to make switchable map function? I think it is possible if you add three buttons(lets say economy, normal, power) that loads three different maps by pressing the buttons.

 

I would like to start using FCTune to datalog and I can't really until the aux inputs are working. When do you think you'll have that feature running?

By the way I absolutely love the interface the software provides. Much nicer than FC Datalogit.

 

Wow! Great thread, and great work FastHatch!

Is there any info about Fctune adapter and software for ECR33 RB25DET release? I`m looking for tuning tool for my PFC as i don`t even have a commander, only ECU itself. And i want to install it and tune before winter as all this power is useless at winter time... Any chance?

 

hey fast hatch!!!! could you let me know what type of cable??? would be needed to connect ,my power fc to the fc tune software????? so i can have it on hand!!!! due to the fact that the the fc tune software is close to being released!!! also will the honda version be part of the 1st release compatable with fc tune??? any info from anyone would help!!
thanks all[I][U]

 

any update on the box? or a full release for FC Tune? I like the coloring of the fuel/ign maps

 

So just to be clear, the current release is actually usable to tune? Or is it still a development version that is still under construction?

BTW, I can't believe how awesome this software works. I've got an FC and have been unable to modify the AP Engineering unit with the datalogit software that I received.
So thank you very much for putting your efforts into something like this!

 

Ok... comments for FastHatch:

1) When we tune on a dyno we need the ability to change the value in any cell by pressing up/down, +/-, pgup/pgdn or some combination of buttons that will increase and decrease the value in the cell without having to type in a new number.

2) Secondly, it seem as though the update to the PowerFC isn't completed until the entire calibration is uploaded to the powerFC. Even with the "Update on the fly" box checked I don't see any changes in how the car runs. My examples were rev limiter and some idle mixture values.


Thanks!!!

 

so if we just have a pfc and no comander cand i download this software to get it tunded for something basic? or do i havew to wait for the full version?