Power FC Datalogging observation
#1
Senior Member
Thread Starter
Join Date: May 2005
Location: Birmingham
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
Datalogging observation
It seems to me that the longer I run the car the more stable everything comes. Such as the boost is more stable, I get more of a spike when the car is first ran. And my afr's seem to be richer when the car is first ran compared to after 20min or so of logging. It also seems as though the knock values drop to basically 1 compared to a few small levels, 10-15, at the same same rpms with higher afr's.
I'm letting the car get up to temp, or so the data says, before I start logging so it seems as though everything needs time to stabalize completely at normal operating temps before you can get the correct feedback. Does anyone else feel this way?? or have the same issue??
I'm letting the car get up to temp, or so the data says, before I start logging so it seems as though everything needs time to stabalize completely at normal operating temps before you can get the correct feedback. Does anyone else feel this way?? or have the same issue??
Thread
Thread Starter
Forum
Replies
Last Post
edmcguirk
NE RX-7 Forum
3
05-30-18 06:50 PM