Power FC Change setting on the PFC and still no fire
Passenger
Posts: n/a
Change setting on the PFC and still no fire
My car has the fuel pump rewired with a relay in place. I have a full exhaust, Intake and IC.
The car runs fairly rich and sometimes I do get backfire when shifting slow.
I went into the PFC and changed the 3 A/C Rev from 1100 to 8100 which it what my limit is set to.
I was a little afraid to drive it at first in case my bumper caught on fire, but i did it slow and also getting on the car and i got no flame on decel.
Is there something wrong?
The car runs fairly rich and sometimes I do get backfire when shifting slow.
I went into the PFC and changed the 3 A/C Rev from 1100 to 8100 which it what my limit is set to.
I was a little afraid to drive it at first in case my bumper caught on fire, but i did it slow and also getting on the car and i got no flame on decel.
Is there something wrong?
^ So you essentially removed your fuel cut on decereration so you can shoot flames?
And you are not happy because you did not get any flames
. 
Also, wrong section.
John
And you are not happy because you did not get any flames
. Also, wrong section.
John
Passenger
Posts: n/a
Passenger
Posts: n/a
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
rx8volks
Canadian Forum
0
Aug 13, 2015 04:55 AM