MR.45

iTrader: (1)

does the denso apexi 3 bar map sensor need to be calibrated like the gm 3 bar map sensor? by "plug and play" do they mean just plug it in and im good to go without messing with the scale and offset or calibration? or am i just dreaming?..... please help me out, im tryin to run some high boost, I just dont understand how to calibrate the gm 3 bar. thanks

fd_neal

iTrader: (4)

plug in the sensor, selsect #2 (option 1) for PIM offset.
Now thw map sensor will read accuraty (or close to) there should be more information on better calibration if you need it.

MR.45

iTrader: (1)

so thats all there is to it? plug in the apexi 3 bar and select option 1 and theres no need for calibration?.. if this is the case then this is a way better deal than the gm 3 bar.

Banzai-Racing

iTrader: (11)

If you have a Datalogit, then changing the offset and scale for the GM 3 bar is no big job, type in a couple numbers and you are done. If you do not have one then you can install the Apexi sensor, but for the $300 price tag, you would be better off buying a DL. Just plugging in a map sensor does not allow you to run high boost, the car still needs to be tuned.

MR.45

iTrader: (1)

I have the newest version of PFC and it seems there are so many suggestions out there as far as offset and scale numbers go. What scale and offset would you recommend for the gm 3 bar? Thank you for your help

Banzai-Racing

iTrader: (11)

same as always 6630 offset 0, with our plug and play GM sensor http://www.banzai-racing.com/product...er_harness.htm

https://www.rx7club.com/power-fc-forum-47/3-bar-map-install-help-780045/

MR.45

iTrader: (1)

sounds good. does it matter what option I put it on? also do you sell the gm 3bar without the harness? Thanks!

Banzai-Racing

iTrader: (11)

Read the bright red letters

cewrx7r1

iTrader: (2)

I calibrated one Apexi 3 bar and the values are:
45200/3300 for FD3S or 6780/3000 Univ DLs.

I also did 2 GMs:
43500/275 or 6525/275.

MR.45

iTrader: (1)

thanks for your help cewrx

SPICcnmGT

What exactly is the difference between the GM and APexi sensors, beside the GM costing about 1/3? Is there an advantage to one over the other?

Banzai-Racing

iTrader: (11)

The Apexi (Denso) is plug and play without our adapter harness. Beside that they both function the same and read up to 2 bar of boost.

SPICcnmGT

Thanks, that's what I gathered just wanted to make sure. I'll be ordering one from you in the next few days.