Hi Guys ,

Need some input, have anyone of you guys using the 13re intake manifold on the FC3s running with Power fc.My questions are :

1 : Can the TPS sensor of the 13re mated to the Power FC?

2: will their be any wiring issues regarding this?

Im using power fc with the Banzai kit adapter and its running fine on the stock FC intake manifold.

Thanks

Ezin

 

We have a how to for wiring the Cosmo TPS

http://www.banzai-racing.com/how_to_cosmo_tps.htm

However you cannot just bolt a 13b-re intake manifold onto a 13bt

 

Hi there ,

Thanks for the input , i ll try to talk to my wireman and follow your instructions.

Im going to use the upper intake manifold but i understand that theres a special plate for it to be install.

On the Manifold that i have , have 2 sensors one TPS and the other one not so sure what is that for/

Just gathering some info before installing.Can you highlight me on this ?

Thanks

Ezin

 

All four of the Cosmo intake runners are the same size, the FC (and FD) primary runners are half the size. You are going to have a huge step down going from the UIM to the LIM, even with an elaborate adapter.

I can only guess at what you are talking about as far as sensors go. There is the ISC that is on the bottom of the TB. This can just be blocked off.

 

Hi there ,

Thanks for the input and i would like to say that the adapter i bought from you guys are great.

Ok need more info regarding the UIM 13re ,if you dun mind.

Initially i got a full set in the UIM and LIM of the 13re ,but looks like it cant be fitted all together on the Fc engine.

I was told if i need to fit the UIM , i need to get an adapter?Do you have this that i can bought of from Banzai?

Please help and advise

Thanks

 

I do not see how it is even possible to install a Cosmo 13b-re UIM on any RX7 LIM. The intake runners are not even close. This is why I said elaborate adapter. The FD (13b-rew) UIM can be maDe to fit a S5 LIM, I think you may have been mislead.

 

Oh ok ,

Thanks then for the input