PFS PMC Peter Farrell
04-17-06, 03:03 PM
#1
Samsonite
Thread Starter
iTrader: (3)
Join Date: Oct 2002
Location: Virginia
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
Peter Farrell
Is anyone running a full Peter Farrell installed and tuned single turbo set-up? I was wondering what people felt about the quality of the install and parts, as well as reliability. More specifically, how does the kit compare to other popular kits like A-Spec's or RX7Store's.
Also, in terms of performance, which one makes full power quickest and has the most streetable feel. I'm looking to ultimately make about 400hp or just south of that. It probably won't be used for drag as much as hot-lapping or the like. Any information would be appreciated. Thanks.
-Chris
Also, in terms of performance, which one makes full power quickest and has the most streetable feel. I'm looking to ultimately make about 400hp or just south of that. It probably won't be used for drag as much as hot-lapping or the like. Any information would be appreciated. Thanks.
-Chris
04-17-06, 03:25 PM
#2
Living life 9 seconds at a time
iTrader: (2)
Join Date: Feb 2001
Location: Abingdon, Md
Posts: 6,541
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ChrisChung125
Is anyone running a full Peter Farrell installed and tuned single turbo set-up? I was wondering what people felt about the quality of the install and parts, as well as reliability. More specifically, how does the kit compare to other popular kits like A-Spec's or RX7Store's.
Also, in terms of performance, which one makes full power quickest and has the most streetable feel. I'm looking to ultimately make about 400hp or just south of that. It probably won't be used for drag as much as hot-lapping or the like. Any information would be appreciated. Thanks.
-Chris
Also, in terms of performance, which one makes full power quickest and has the most streetable feel. I'm looking to ultimately make about 400hp or just south of that. It probably won't be used for drag as much as hot-lapping or the like. Any information would be appreciated. Thanks.
-Chris
Dave Claire (FD3Boost) has the PFS turbo kit. Its a very nice kit for the street. He made 430ishrwhp @15psi which is more than enough and it spools quick due to being ballbearing. The quality of the manifold is top notch. Plus you can't go wrong with Ray Wilson tuning it, look at my car. Good luckwith your choice
04-19-06, 09:32 PM
#3
I Dislike Everything
iTrader: (1)
Join Date: Apr 2002
Location: St. Louis/Southern Illinois
Posts: 3,701
Likes: 0
Received 7 Likes
on
7 Posts
Chris,
I can chime in a small amount. I rode shotgun in Dave Claire's(FD3Boost) RX-7. And it scared me to death. It pulled hard all the way through 4 gears, and the top of 5th. We could not go any further, we were going to fast. LOL
And yeah, look at ErnieT's car, that thing is ludacris speed fast!!
I can chime in a small amount. I rode shotgun in Dave Claire's(FD3Boost) RX-7. And it scared me to death. It pulled hard all the way through 4 gears, and the top of 5th. We could not go any further, we were going to fast. LOL
And yeah, look at ErnieT's car, that thing is ludacris speed fast!!
04-24-06, 01:49 PM
#4
thats not paint....
Ray Wilson is helping me with my setup and hopefully tuning when I get it running. He is a great guy and does amazing work!!! I would recommend him to anyone.
04-25-06, 01:32 AM
#6
Living life 9 seconds at a time
iTrader: (2)
Join Date: Feb 2001
Location: Abingdon, Md
Posts: 6,541
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Xscreamer
I had a bad experience with Peter Farrell. Not his parts just his quality if workmanship. This was a number of years ago so I'll leave it at that.
Trending Topics
04-25-06, 09:58 PM
#8
Yea I have a PFS turbo "kit" It was something Ray helped me piece together. I dont think it is something that is a specific kit you can buy although I am sure he could easily duplicate it. Its a Precision Turbo T67. (not ball bearing though Ernie, btw there is also no "e" in my last name. Clair) So it made 430hp at 16psi with a low compression motor. Ray is building me a new motor next week. The turbo is very nice and I am even down sizing it some ( originally suggest to me by Ray but I had my mind made up on a big hotside. I should habe listened to him in the first place. The shops fabrication skills of both Jason and Ray are top notch. Fit and finish on all the parts is very good. Ray is a "detail" guy. I am picky about my car and he sets things up better than I would most of the time. Overall the quality and craftsmanship is cream of the crop.
I have been a PFS customer since 2001 and I have never had any complaints. Especially not since Ray bought out Peter. Ray has been working on my car for a long time and I trust his work with no hesitation. He is extremely talented and very honest. My only complaint is I don't have enough cash to hire him to build me a three rotor motor.
Take your car there you will be happy that you did.
I have been a PFS customer since 2001 and I have never had any complaints. Especially not since Ray bought out Peter. Ray has been working on my car for a long time and I trust his work with no hesitation. He is extremely talented and very honest. My only complaint is I don't have enough cash to hire him to build me a three rotor motor.
Take your car there you will be happy that you did.
Last edited by Fd3BOOST; 04-25-06 at 10:01 PM.
06-04-06, 07:18 PM
#13
Living life 9 seconds at a time
iTrader: (2)
Join Date: Feb 2001
Location: Abingdon, Md
Posts: 6,541
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by matty
Where is PFSupercars? Does anyone have experience shipping cars? any idea on how much it would cost to ship a car there from Southwestern CT?
www.pfsupercars.com
06-04-06, 07:28 PM
#14
Eats, Sleeps, Dreams Rotary
Originally Posted by ErnieT
Frederick, Md.
www.pfsupercars.com
www.pfsupercars.com
06-04-06, 07:51 PM
#15
Adrenaline
Join Date: Feb 2001
Location: Long Island, NY
Posts: 1,261
Likes: 0
Received 0 Likes
on
0 Posts
Ray Wilson does outstanding work. It's insane how much detail he goes through to make sure he is tuning your RX-7 correctly. I strongly recommend Ray, he is extremely nice, helpful, and can ****-in' tune!
06-04-06, 08:34 PM
#16
Original Gangster/Rotary!
iTrader: (213)
Originally Posted by RecKleSs
Ray Wilson does outstanding work. It's insane how much detail he goes through to make sure he is tuning your RX-7 correctly. I strongly recommend Ray, he is extremely nice, helpful, and can ****-in' tune!
?
01-25-13, 06:43 PM
#20
Newbie
Join Date: Nov 2002
Location: columbia, md
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
pfsupercars and ray wilson
I have not been on this site for ages.....
I have a completely modified and race ported 93' rx-7 which was built by Peter Farrell Supercars (when they were in business) and was subsequently serviced by Ray Wilson (who bought Peter out and created pfsupercars.) Ray has basically taken care of my car in some form or another since 95' but I am not sure that he and pfs are still in business. I have been unable to get a return call in over 6 weeks now. Does anyone know if he is still in business? or did he go under?
If he is out of business who in my area (Columbia, MD) can service my car?
I need someone who knows these cars in and out like Ray did and that I can trust.
Any help would be appreciated.
Craig Zaller
I have a completely modified and race ported 93' rx-7 which was built by Peter Farrell Supercars (when they were in business) and was subsequently serviced by Ray Wilson (who bought Peter out and created pfsupercars.) Ray has basically taken care of my car in some form or another since 95' but I am not sure that he and pfs are still in business. I have been unable to get a return call in over 6 weeks now. Does anyone know if he is still in business? or did he go under?
If he is out of business who in my area (Columbia, MD) can service my car?
I need someone who knows these cars in and out like Ray did and that I can trust.
Any help would be appreciated.
Craig Zaller
10-10-19, 06:47 AM
#21
Newbie
Join Date: Sep 2019
Location: Peoria Illinois
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Peter Farrell Rx7
I would love to see pictures and videos of your Peter Farrell Rx7. My name is Jay Winne, 3094270634. My email is rtwinne@yahoo.com.
Thanks
Thanks
I have not been on this site for ages.....
I have a completely modified and race ported 93' rx-7 which was built by Peter Farrell Supercars (when they were in business) and was subsequently serviced by Ray Wilson (who bought Peter out and created pfsupercars.) Ray has basically taken care of my car in some form or another since 95' but I am not sure that he and pfs are still in business. I have been unable to get a return call in over 6 weeks now. Does anyone know if he is still in business? or did he go under?
If he is out of business who in my area (Columbia, MD) can service my car?
I need someone who knows these cars in and out like Ray did and that I can trust.
Any help would be appreciated.
Craig Zaller
I have a completely modified and race ported 93' rx-7 which was built by Peter Farrell Supercars (when they were in business) and was subsequently serviced by Ray Wilson (who bought Peter out and created pfsupercars.) Ray has basically taken care of my car in some form or another since 95' but I am not sure that he and pfs are still in business. I have been unable to get a return call in over 6 weeks now. Does anyone know if he is still in business? or did he go under?
If he is out of business who in my area (Columbia, MD) can service my car?
I need someone who knows these cars in and out like Ray did and that I can trust.
Any help would be appreciated.
Craig Zaller
10-10-19, 12:11 PM
#22
F'n Newbie...
iTrader: (6)
I would love to see pictures and videos of your Peter Farrell Rx7. My name is Jay Winne, 3094270634. My email is rtwinne@yahoo.com.
Thanks
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
2-Rotor
3rd Generation Specific (1993-2002)
1
11-10-02 07:54 PM
