THE RX7 KA-T runs!!
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: south dakota
Posts: 547
Likes: 0
Received 0 Likes
on
0 Posts
THE RX7 KA-T runs!!
well like the title says, it runs.
...need to flush the fuel tank out now and get some good 91 octane gas in there. on May 8th the car is getting the cage, dash, driveshaft made.
after the cage and driveshaft get put in i'll probably take it to the track shortly there after for some test and tune flogging
...need to flush the fuel tank out now and get some good 91 octane gas in there. on May 8th the car is getting the cage, dash, driveshaft made.
after the cage and driveshaft get put in i'll probably take it to the track shortly there after for some test and tune flogging
#4
yeah, can you post some pics of the mounts? im interested in doing an sr swap in my fc... since that ka and sr has the same mounting points.. i wouldnt mind seeing some pics... also are you using a standalone to run it? or just using stock wirings?
#5
Senior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: south dakota
Posts: 547
Likes: 0
Received 0 Likes
on
0 Posts
Im using a stock wiring harness (recut and redone to my liking) with a JWT retuned ECU. im running a t3/t04e turbo (prevously dyno'd it at 373whp and 372wtq) with a N62 maf, and my own I/C, radiator setup. Mounts were all custom done but me and a friends shop.
tranny mount
custom engine mounts (solid mounts with poly inserts)
if you feel like checking out the build...this is my folder links
http://s35.photobucket.com/albums/d1.../RX7/?start=20
older engine pics before the rewire ect...
tranny mount
custom engine mounts (solid mounts with poly inserts)
if you feel like checking out the build...this is my folder links
http://s35.photobucket.com/albums/d1.../RX7/?start=20
older engine pics before the rewire ect...
#6
Senior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: south dakota
Posts: 547
Likes: 0
Received 0 Likes
on
0 Posts
Here's and update after getting the harness all finished and hidden. Let me know. Also dumped out the gas from the tank, it was some rancid **** let me tell ya, glad only alittle ran through that motor. I should have the headlights and tail lights wired tomorrow hopefully.
Trending Topics
#10
Senior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: south dakota
Posts: 547
Likes: 0
Received 0 Likes
on
0 Posts
Thats ok, let the guy think what he wants, i dont want this to turn into another "why KA's suck thread"
...we'll see how bad my ka "sucks" when im running 10's down the the track.
...we'll see how bad my ka "sucks" when im running 10's down the the track.
#14
Senior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: south dakota
Posts: 547
Likes: 0
Received 0 Likes
on
0 Posts
^^^Thanks for the love! to be honest i wouldnt have stuck the KA24DE in the rx7 if A) The 12a didnt take a crap. B) I didnt have the knowlege of this motor or C) I had the spare motor laying around.
#17
Senior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: south dakota
Posts: 547
Likes: 0
Received 0 Likes
on
0 Posts
im going to be building a shroud on the front of the car that directs air into the rad/I/C this should solve some of that problem, i'll also be running a puller and pusher fan on each side of the setup...Yes im concerned with my coolant temp, so im doing everything in my power to try to keep them down, i'll be sure to watch them like a hawk on my first couple of outings.
#18
Say hello to Mr.Wankel
iTrader: (7)
awsome swap. i will be looking into a SR or KA-T swap in the near future. why did you choose the KA-T over the SR? man, i have a lot of research to do. do you think you could reproduce those mounts? where did the shifter come out in relation to the stock location? did you use the rx7 or 240 subframe?
#19
Senior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: south dakota
Posts: 547
Likes: 0
Received 0 Likes
on
0 Posts
the car is officially 100% wired up as of today, headlights, taillights, running lights, turn signals, ect ect.
well..ok i lied, i still need to wire up my electric fan..lol
yay only a week and a half and it gets its cage and driveshaft!!!
well..ok i lied, i still need to wire up my electric fan..lol
yay only a week and a half and it gets its cage and driveshaft!!!
#21
Say hello to Mr.Wankel
iTrader: (7)
nevermind. i looked at your pics and answered some of those questions myself. now i have a few more.
how did you run the exhaust? how low is it to the ground? specs? pics?
would you be able to duplicate those mounts? can you get a pic of the tranny mount installed? how is hood clearance? any other issues?
what rearend are you using? i take it this car is for drifting? if so, you definately need to do a lot of work to the rearend and suspension. i HIGHLY recommend respeed. theyll have everything you need.
http://www.mrcmfg.com/respeed/catalog/
how did you run the exhaust? how low is it to the ground? specs? pics?
would you be able to duplicate those mounts? can you get a pic of the tranny mount installed? how is hood clearance? any other issues?
what rearend are you using? i take it this car is for drifting? if so, you definately need to do a lot of work to the rearend and suspension. i HIGHLY recommend respeed. theyll have everything you need.
http://www.mrcmfg.com/respeed/catalog/
#22
Senior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: south dakota
Posts: 547
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by aws140
nevermind. i looked at your pics and answered some of those questions myself. now i have a few more.
how did you run the exhaust? how low is it to the ground? specs? pics?
would you be able to duplicate those mounts? can you get a pic of the tranny mount installed? how is hood clearance? any other issues?
what rearend are you using? i take it this car is for drifting? if so, you definately need to do a lot of work to the rearend and suspension. i HIGHLY recommend respeed. theyll have everything you need.
how did you run the exhaust? how low is it to the ground? specs? pics?
would you be able to duplicate those mounts? can you get a pic of the tranny mount installed? how is hood clearance? any other issues?
what rearend are you using? i take it this car is for drifting? if so, you definately need to do a lot of work to the rearend and suspension. i HIGHLY recommend respeed. theyll have everything you need.
hope that answered all your questions...i love fabbing..and this car is my first so far.
~Nick
#24
No Rotor_No Motor
Join Date: Feb 2007
Location: Fremont, California
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Man, im a nissan datsun enthusiest...and that KA is notorious with the low end torque....with that turbo...mid and high wont flatten out.....im new to this whole rotary thing but i know how to work on them.....that nice though
#25
putting it back together
Join Date: Jul 2005
Location: Alabama
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
I'm happy to see you're making progress on your kat-7. I got tired of looking at the 240 i was going to swap in a tII motor into and sold it. For now i'm just focused on getting my FD back on the road.