Piston Engine in RX-7
#1
Junior Member
Thread Starter
Join Date: May 2004
Location: Annapolis Vally Nova Scotia
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Piston Engine in RX-7
Hey,
I was just wondering if it is at all possible to drop a Piston engine into a 2nd gen, like from a precidia or a protege. Im not saying im doing it i love the rotary. Im just curious if they are compatible?
thanks
-PulsE-
I was just wondering if it is at all possible to drop a Piston engine into a 2nd gen, like from a precidia or a protege. Im not saying im doing it i love the rotary. Im just curious if they are compatible?
thanks
-PulsE-
#3
Locust of the apocalypse
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
The easiest swaps are ford v-8's in first gens....
Granny's speed shop http://members.tripod.com/~grannys/
Granny's speed shop http://members.tripod.com/~grannys/
#7
Junior Member
Thread Starter
Join Date: May 2004
Location: Annapolis Vally Nova Scotia
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
c'mon guys... i didnt make this thread to turn it into a flame fest... i just want to know. So please dont post anything unless you want to help me...
thanks
-PulsE-
thanks
-PulsE-
Trending Topics
#10
Senior Member
iTrader: (1)
Join Date: May 2003
Location: NH
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
Been discussed too many times!
Short answer is yup, you can even put a couple gerbils in a cage with a wheel or rubber bands under the hood to power the Rx7.
Your choice of econobox motors would power the car, but it would be a slug.
If you really want to do the conversion, go to the site that was listed above and do a Chevy or Ford V8 swap.
Granny's speed shop http://members.tripod.com/~grannys/
But best not to and rebuild the motor or pass the car onto someone that wants to keep the Rotary alive...
JMHO
Mike B
Short answer is yup, you can even put a couple gerbils in a cage with a wheel or rubber bands under the hood to power the Rx7.
Your choice of econobox motors would power the car, but it would be a slug.
If you really want to do the conversion, go to the site that was listed above and do a Chevy or Ford V8 swap.
Granny's speed shop http://members.tripod.com/~grannys/
But best not to and rebuild the motor or pass the car onto someone that wants to keep the Rotary alive...
JMHO
Mike B
Last edited by Healeyguy; 07-29-04 at 01:49 PM.
#11
Junior Member
Join Date: May 2001
Location: Boise, ID
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
flame on indeed, there are TONS of pistons in FC's, however a 4 banger would be an insult/waste of time!
www.v8rx7.com
www.v8rx7.com
#12
Full Member
Yes you can put a piston motor in your car, and dont worry about getting flamed. Its your car do what you want to it, if anyone really cared about the stupid rotary that much they would buy it off you, take it home, and feel wonderful about saving one of the highest horsepower boat anchors ever built. If this forum is so distrubing to them they could always just stop reading it, but that would be to easy.
#13
Originally Posted by gammey4
Yes you can put a piston motor in your car, and dont worry about getting flamed. Its your car do what you want to it, if anyone really cared about the stupid rotary that much they would buy it off you, take it home, and feel wonderful about saving one of the highest horsepower boat anchors ever built. If this forum is so distrubing to them they could always just stop reading it, but that would be to easy.
dude ..u r my hero..why again are you on a rotary forum?.
#16
Zero Rotor Motorsports
iTrader: (1)
Join Date: Feb 2004
Location: Glen Burnie, MD
Posts: 2,525
Likes: 0
Received 0 Likes
on
0 Posts
For more info about piston swaps:
www.torquecentral.com (it has a V8 RX7 section)
www.misred.com
www.rx7v8.com
www.hinsonsupercars.com
Good luck.
www.torquecentral.com (it has a V8 RX7 section)
www.misred.com
www.rx7v8.com
www.hinsonsupercars.com
Good luck.