Other Engine Conversions - non V-8 Discussion of non-rotary engines, exc V-8's, in a car originally powered by a Rotary Engine.

fb with ford 2.3 - for sale

Thread Tools
 
Search this Thread
 
Old 07-31-04, 05:10 PM
  #1  
i say what i want

Thread Starter
 
onepointone's Avatar
 
Join Date: Aug 2002
Location: richmond, va
Posts: 1,866
Likes: 0
Received 0 Likes on 0 Posts
fb with ford 2.3 - for sale

mods, please dont move this yet, im having a hard time getting the word out.

back up for sale. i bought a bike, and i dont have time for 2 cars now. the price is $1500 obo. like i said before, i want it to go to a good home.

i since have taken off the boost controller so its not studdering under boost anymore.

ive also removed the headerpanel and put a autometer water temp gauge in and it runs at a good temp. i wouldnt leave it that way for going around town though.

please give her a good home.. somebody



edit: i have been looking into getting a megasquirt ecu for this in hope of it clearing up the hot start, and so on. its a full stand alone that runs $120. thats right, $120, ill even send you fuel maps and stuff if you get it.

heres the original ad i posted.





some of you may have caught some of my threads with my rx7 with the ford 2.3t. i have been working on this car for the good part of a year. i have put AAALOT of time/money/effort into building up this car. but i dont know if i want to mess with it anymore. i want a reliable daily driver, and i sure dont have room for 3 cars, and i dont want to sell my current rx7 that i drive everyday. the car has alot of potential, and is very quick. is has a few problems, which makes me want to not mess with it, but they arent a very big deal.

-i need to upgrade the cooling system. im sure all i need to do is relocate the radiator, and move the electric fan to the other side and it should be good.

-theres a no hot start problem, that has been nailing me. you can get it to start once its hot, but its hard. im told its part of the tfi in the dizzy.

-with the boost controller set to 13 psi, it has a studder under boost in 1st and 2nd gear, 3rd gear pulls like hell, and on stock boost its fine. im guessing thats another issue with the dizzy/tfi

i have put ALOT of time into this car. i hate to even THINK of selling it, but im in a situation where i need money. the only thing is, i dont know if i should part it out over selling it, or just let it sit till i can mess with it more. i would hate to see someone else rolling around in a car i built, but i dont know if i want to go through the trouble to part her out.

hers a mod list, along with some pictures..

-122k on the chassis
-1986 merkur 2.3t engine
-manual boost controller
-rotated upper intake
-knife edged and ported lower intake
-front mount intercooler
-14" electric fan
-big VAM from turbocoupe
-t3 turbo
-new plugs,wires, cap, and rotor
-t5 tranny from a turbocoupe
-willwood mastercylinder for clutch master cylinder (so i could use a hydro clutch instead of converting to cable)


suspension
-1985 gslse suspension (front and rear)

misc.
-the motor and tranny are on solid motor mounts
-battery located in the back
-no interior behind the seats
-boost/a/f gauges
-walbro 255 fuel pump
-sound deading material is GONE from the seats back.

its actually not that bad of a ride on solid motor mounts, i was definately surprised.

theres is no exhaust system on it. however the downpipe goes all the way to the cat (which is still there) and ends afterwards. it runs straight back, but i was thinking about making a temp side exit.

i think this car has alot of potential, i just dont have the time to mess with it. randy on here is running 12.44 on street tires with a slightly similar setup. i hate to see it go, but if the price is right, i guess ill have to.

angelfire is being a pos, heres the website from the buildup at www.angelfire.com/va3/rx23 the entire buildup was recorded here.

the most recent pictures are at http://www.angelfire.com/va3/rx23/31204.html

there are more recent ones. i changed one or two things in the engine bay, nothing noticable, just ran a line for the breather on the valve cover, and the battery box has a lid, and is sealed/vented to the outside.


im looking for offers as i odnt really know what to ask for it
Old 08-01-04, 12:31 AM
  #2  
i say what i want

Thread Starter
 
onepointone's Avatar
 
Join Date: Aug 2002
Location: richmond, va
Posts: 1,866
Likes: 0
Received 0 Likes on 0 Posts
here are some pictures






Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tonka_1956
1st Generation Specific (1979-1985)
1
09-02-15 05:55 PM



Quick Reply: fb with ford 2.3 - for sale



All times are GMT -5. The time now is 09:11 PM.