bad ass 2jz twin turbo rx7 fd build
03-24-12, 02:06 PM
#126
Full Member
iTrader: (2)
Join Date: Nov 2003
Location: WC PA
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Hey man, could you share the specs on that driveshaft?
I also have a tech2 kit, V160, and Cobra rear with a Samberg cradle.
Can you tell me more about your new motor mounts? The tech2 ones are WAY too soft.
I also have a tech2 kit, V160, and Cobra rear with a Samberg cradle.
Can you tell me more about your new motor mounts? The tech2 ones are WAY too soft.
03-24-12, 09:05 PM
#127
Full Member
Thread Starter
Join Date: Oct 2004
Location: nj
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Just get the toyota supra or sc300 motor mounts tech2 mounts are crap i should throw them at them for selling thajunk and saying they are good for 800hp they not even good for idle
03-26-12, 12:45 PM
#129
Full Member
Thread Starter
Join Date: Oct 2004
Location: nj
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Thats what im using. But i also modded my subframe. Update i got my exhaust on and i ordered all the pRts to make my a/c lines. Im going to use the rx7 drier and condenser.
04-13-12, 01:10 PM
#136
Full Member
iTrader: (2)
Join Date: Nov 2003
Location: WC PA
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Did you have to install spacers, or a washer stack, on the front ears of the 8.8 housing? I assembled mine to get ready to weld it and the front mounts points were way too low.
04-20-12, 06:34 AM
#138
Full Member
iTrader: (2)
Join Date: Nov 2003
Location: WC PA
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
I'm on the verge of doing the same. I bought a very nice SS 4" exhaust, and the subframe is right in the way. I'd like to build some sort of structure over the subframe front cross bar in order to clear the exhaust.
04-28-12, 02:32 AM
#141
Senior Member
Join Date: Sep 2003
Location: Toronto
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
Awesome build. You will have a reliable rx7 with that 2JZ in there and make some great power doing it. A few of my buddies own Supras and those motors are unbelievable. Hard to deny the fact that the 2JZ is arguably the very best Japanese motor ever built.
05-02-12, 08:41 PM
#144
Full Member
iTrader: (2)
Join Date: Nov 2003
Location: WC PA
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
05-15-12, 01:56 PM
#145
Full Member
Thread Starter
Join Date: Oct 2004
Location: nj
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
The subframe for the cradle i did not have to mod. I just did one cut on my exhaust and that was it i was done but i also have my own built exhause so im not sure you can do that with another exhause it just happen that my exhaust happen to work out and be that easy. I already installed the driveshaft shop. Pro hubs im getting an axle this week. I also have rsx seats in the car now
