rx3 street/strip build
#176
E85 Addict
Thread Starter
#177
E85 Addict
Thread Starter
Im going back to 13b as for now, all motor mounts etc will still work with the 20b but i still miss to many parts and dont want to spend that kind of money right now.
Stock oil pan wont fit with the new subframe so ive drawn a new one
Milled out a 6mm thick flange
My 200amp welder didnt like the 6mm flange, i blew 4 fuses in total :-) i need more seat time on alu welding...
Will add baffles etc later
Test fit
Stock oil pan wont fit with the new subframe so ive drawn a new one
Milled out a 6mm thick flange
My 200amp welder didnt like the 6mm flange, i blew 4 fuses in total :-) i need more seat time on alu welding...
Will add baffles etc later
Test fit
#180
E85 Addict
Thread Starter
#190
E85 Addict
Thread Starter
Sometimes you do stuff a little bit to early.. I made my caliper adapers with measures from a worn rotor.. The measures were off ofcourse.
Making new ones, left one is done
Making new ones, left one is done
#194
E85 Addict
Thread Starter
Thanks guys, appreciate it!
been working alot this summer, no time for the cars
I've done some small things..
Got my wheels! 17x7 front and 18x9.5 rear
i need to space out the wheels aprox 15mm, the tire is hitting the struts.. i also wanted to center the brake disc and wheels with this spacer since the aerospace hubs doesn't do this.
made some mods in the lathe
before
after
didn't have any round bar so had to mill some first
after lathe work
finished product
been working alot this summer, no time for the cars
I've done some small things..
Got my wheels! 17x7 front and 18x9.5 rear
i need to space out the wheels aprox 15mm, the tire is hitting the struts.. i also wanted to center the brake disc and wheels with this spacer since the aerospace hubs doesn't do this.
made some mods in the lathe
before
after
didn't have any round bar so had to mill some first
after lathe work
finished product
#196
E85 Addict
Thread Starter